Specifications

LIP-8002/8002A

iPECS Installer Guide

 Press the digit, or move cursor to 3.Phone Settings using the navigation buttons, and

press the OK button.

 Press the

digits, or move cursor to 10.Language using the navigation buttons, and

press the OK button.

 Select a Language from the list using the Up/Down navigation buttons, and press the OK

button.

 Move to another parameter with the navigation buttons and continue the session or press the

Settings (

) button to exit the configuration session.

An asterisk, , displays in front of the current language selection.

3.7 Call Preferences

Call Preferences define various call handling features of the IP Phones.

3.7.1 Do Not Disturb

When the DND (Do Not Disturb) feature is active, the IP Phone does not notify the user of an

incoming call. The IP Phone does not ring and the associated line LED does not flash. This

allows you to work without interruption from an incoming call. The call server configuration

determines routing of the incoming call while your phone is in DND. To activate DND, DND

must be enabled.

To enable the DND operation:

 Press the Settings (

) button. If the LCD Menu is locked, use the unlock procedure. Refer

to section 3.3

 Press the

digit, or move the cursor to 4.Call Preferences using the navigation buttons

and press the OK button.

 Press the

digit, or move the cursor to 1.Do Not Disturb using the navigation buttons and

press the OK button.

 Select On to enable DND, or select Off to disable DND using the Up/Down navigation

buttons and press the OK button.

 Move to another parameter with the navigation buttons and continue the session or press the

Settings (

) button to exit the configuration session.

3.7.2 Call Waiting

With Call Waiting configured, while on a call the IP Phone alerts the user of an incoming call.

The line button flashes to indicate the new call, and an optional beep tone is delivered over the

existing conversation, see section 3.7.3

. In addition, the LCD displays the incoming caller id

during the ring signal so you know who is calling before you interrupt the current call.