Specifications

LIP-8002/8002A
iPECS Installer Guide
41
If Call Waiting is disabled, the IP Phone will reject the new call. The call server configuration
determines routing of the incoming call.
To enable/disable Call Waiting:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 4.Call Preferences using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 2.Call Waiting using the navigation buttons and
press the OK button.
 Select On to enable Call Waiting, or select Off to disable Call Waiting using the Up/Down
navigation buttons and press the OK button.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
3.7.3 Call Waiting Tone
While off-hook, the IP Phone can provide a tone over the existing conversation to indicate a call
waiting. To receive the tone, Call Waiting must also be enabled. Refer to section 3.7.2
.
To enable/disable Call Waiting Tone:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 4.Call Preferences using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 3.Call Waiting Tone using the navigation buttons
and press the OK button.
 Select On to enable the Call Waiting Tone, or select Off to disable the Call Waiting Tone
using the Up/Down navigation buttons and press the OK button.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
3.7.4 Call Hold Ringback
With Call Hold Ringback enabled, the IP Phone rings as a reminder of calls on hold when the
user returns the IP Phone to idle.
To enable/disable Call Hold Ringback:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 4.Call Preferences using the navigation buttons
and press the OK button.