Specifications

LIP-8002/8002A
iPECS Installer Guide
43
3.7.7 Caller ID Blocking
The IP Phone normally sends the assigned display name as the SIP caller id for outgoing calls.
Optionally, the IP Phone can send “anonymous” as the caller id in SIP message headers.
To enable/disable blocking of caller id:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 4.Call Preferences using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 7.Caller ID Blocking using the navigation buttons
and press the OK button.
 Select On to enable blocking of outgoing caller id, or select Off to disable blocking of
outgoing caller id using the Up/Down navigation buttons and press the OK button.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
3.7.8 Anonymous Call Block
The LIP-8002/8002A can block incoming calls with an anonymous caller id.
To enable/disable Anonymous Call Blocking:
 Press the Settings (
) button. If the LCD Menu is locked, use the unlock procedure. Refer
to section 3.3
.
 Press the
digit, or move the cursor to 4.Call Preferences using the navigation buttons
and press the OK button.
 Press the
digit, or move the cursor to 8.Anonymous Call Block using the navigation
buttons and press the OK button.
 Select On to enable Anonymous Call Blocking, or select Off to disable Anonymous Call
Blocking using the Up/Down navigation buttons and press the OK button.
 Move to another parameter with the navigation buttons and continue the session or press the
Settings (
) button to exit the configuration session.
3.8 Phone Book
IP Phones include an internal Phone Book of names and numbers or SIP user ids for up to 100
contacts. The Phone Book menu is accessed through the LCD Menu, with the Down navigation
button in idle stat or, when assigned, a Phone Book flexible button. The Phone Book menu
displays the records. Adding, editing or deleting the records is possible through the Web
Manager, see section 4.8. The phone number or SIP user id in the Phone Book is the contact
information used with Speed Number dialing, see section 3.6.10
. Each contact can have a Ring
type assigned. When a call is received from the contact, the specified ring signal is employed.