Specifications

LIP-8002/8002A
iPECS Installer Guide
54
o Call Waiting Function, when enabled, visually notifies the user of an incoming call
while in a conversation. If disable, when in a conversation, a new call is refused
and the call server routes the call.
o Call Waiting Tone,
when the IP Phone is in use with call waiting enabled, a beep
tone delivered over the existing call indicates an incoming call.
o Call Hold Ringback
, when enabled, rings the phone if the user returns to idle with
a call on hold.
o Message Waiting Tone
, when enabled, stutter dial tone notifies the user a new
message is waiting. Stutter dial tone notification is in addition to the visual flashing
Message LED notification.
o Auto Answer
, when enabled, will activate the speakerphone automatically if an
incoming call is received.
- Call Forwarding
o Conditions
define the condition for Call Forward (Busy, No-Answer, unconditional,
or not used).
o Address to Forward
defines the destination to receive forwarded calls.
- Direct Call (Hotline/Warm-Line)
o Direct Call
, when enabled, places a call to a predefined destination automatically
when the phone goes off hook.
o Direct Call Number
defines the destination for a direct call.
o Direct Call Timer
sets a delay timer for Warm-Line operation. The timer specifies
the period before placing a direct call. The timer is set in 1 second increments
from zero (0) to ten (10) seconds. For Hotline operation, set the timer to zero (0)
seconds.
To modify parameters on the Call Preferences screen:
 Select the desired parameter and enter new values, or select values from the drop-down
menus.
 When complete, select the
button to load new values to the IP Phone memory.