Specifications

LIP-8002/8002A
iPECS Installer Guide
55
4.5 Dial Plan
The IP Phone incorporates a Dial Plan, which monitors the user-dialed digits for patterns
matching the dial plan number. If a match occurs, the phone modifies the digits and processes
the call using instructions in the dial plan.
4.5.1 Digit Map Table
Figure 4.5.1-1 Digit Map Tables Configuration
Using the Digit Map Table, a string of 512 characters may be entered to define the dial plan.
Within the string individual numbers are entered, separated by a ‘|’. In addition to dial pad digits,
special characters may be entered as follows:
- An ‘x’ matches any single digit, (0 to 9).
- A ‘T’ inserts a timed pause for additional digits.
- A ‘.’ matches any number of occurrences of a digit, including zero occurrences and
includes special character matches.
- A ‘+’ matches any number of occurrences of the previous match, including special
characters.
- The ‘[ ]’ matches a digit from a group of digits. This character combination is used with
“.” to define a range, [2-6] matches any digit from 2 to 6 inclusive.
The dial plan can include modification of a matching dialed number before call set-up. The Digit
Map Process defines the modification procedures for a number. The process may include:
- TRNC
defines the number of digits to delete from the dialed number.