Specifications

LIP-8002/8002A
iPECS Installer Guide
59
o DTMF Payload sets the RFC 2833 payload type for DTMF signals.
o DTMF Duration
sets the duration of DTMF signals sent from the phone in milli-
seconds.
o Lock Outgoing Call
locks the IP Phone, requiring password entry to place a call.
o Use Speed Number
enables or disables use 2-digit dialing to dial Phone Book
contacts.
o Key Tone
enables or disables the tone generated when a button on the IP Phone
is pressed.
o Line Lock Out
gives a beef notification after disconnect tone when the call is
terminated.
- Functions
o Download Flag
enables the display of the S/W and configuration download flags
functions under the LCD Configuration Menu, see section 3.6.8.4
or section
3.6.8.5, respectively
o One-touch Pickup
enables the call connection by selecting call on LCD using the
navigation button when there are multi calls. Disabling One-touch Pickup causes
the IP Phone to display the call status when a call is selected; the call does not
connect to the speakerphone or handset unless the OK button is pressed a
second time. This may be useful when the user cannot distinguish LED colors
- Ring Settings
o Ringer Type
sets the default ring type, select one of 4 ring signals for audible
notification of incoming calls,
o Trunk Ringer Type
sets the ring type for incoming call from trunk line, select one of
4 ring signals, ringer off or default ring.
o Ringer
turns the ring signal On or Off.
To modify Phone Setting parameters:
 Select the parameter.
 Enter the new value or select a value from the drop-down menu.
 When complete select
button.
Changing DTMF Duration or Frame Duration requires a reboot of the IP Phone. When
you leave the menu, you will receive a Reboot notice. The IP Phone must reboot to
utilize the new values entered.