Specifications

LIP-8002/8002A
iPECS Installer Guide
88
Section
Field Name
Description
cadence7
Sets the ring cadence for calls with community-1 call in Alert
Info header.
The valid value is an eight value time array (on off on off on
off on off). The valid range is 0 to 30000 milliseconds total
time.
The default is 1500-500-500-3500-0-0-0-0
cadence8
Sets the ring cadence for calls with community-2 call in Alert
Info header.
The valid value is an eight value time array (on off on off on
off on off). The valid range is 0 to 30000 milliseconds total
time.
The default is 1500-500-500-500-500-2500-0-0
cadence9
Sets the ring cadence for calls with community-3 call in Alert
Info header.
The valid value is an eight value time array (on off on off on
off on off). The valid range is 0 to 30000 milliseconds total
time.
The default is 1500-500-500-500-1000-2000-0-0
cadence10
Sets the ring cadence for calls with community-4 call in Alert
Info header.
The valid value is an eight value time array (on off on off on
off on off). The valid range is 0 to 30000 milliseconds total
time.
The default is 500 500 500 500 500 500 500 2500
cadence11
Sets the ring cadence for calls with auto answer call in Alert
Info header.
The valid value is an eight value time array (on off on off on
off on off). The valid range is 0 to 30000 milliseconds total
time.
The default is 500 500 500 500 2500 3500 0 0
frame_duration
Sets the RTP frame duration in milliseconds.
Valid values are 10 to 100.
The default is 20.
jitterbuffer_min_delay
Sets the minimum jitter buffer size, in milliseconds. The Jitter
buffer parameters control the buffer size for out-of-sequence
packets. Using larger values produce less packet loss as the
IP Phone will wait longer for receipt of packets. However,
large values may delay voice packet processing. Smaller
values may produce more packet loss but quicker voice
packet processing.
Valid values are 0 to 150.
The default is 30.
jitterbuffer_nom_delay
Sets the nominal jitter buffer size, in milliseconds.
Valid values are 0 to 150.
The default is 60.
jitterbuffer_max_delay
Sets the maximum jitter buffer size, in milliseconds.
Valid values are 0 to 150.
The default is 120.