Specifications

LIP-8002/8002A
iPECS Installer Guide
89
Section
Field Name
Description
dtmf
Sets the method to determine RFC 2833 payload type.
Valid values are:
• inband — Always generate in-band DTMF.
• nego — Negotiate RFC2833 with remote side.
• rfc2833 — Always generate DTMF digits out-of-band
RFC2833.
• info — Always generate DTMF digits out-of-band in INFO
message.
Default is nego.
key_tone
Controls the Key tone operation. If enabled, when a button
on the IP Phone is pressed the key tone is heard.
Valid values are enable and disable.
The default is enable
condition
Sets conditions for call forward.
Valid values are:
• -1 — Disables forwarding feature.
• 0 — Condition not defined by configuration file, user can
define condition.
• 1 — Forward calls when the call is not answered in the
no-answer.
• 2 —Forward calls when the phone is busy.
• 4 —Forward all calls.
The default is 0 (not defined by configuration file).
FWRD
forwarding_address
Sets the address to receive forwarded calls.
The valid value is a maximum of 60 characters.
The default is blank.
dial_mode
Sets the default dial mode.
Valid values are number (digits), IP address or URL.
The default is number.
pause_timer
Specifies the pause timer, in seconds, for the dial plan.
Valid values are 1 to 30.
The default is 3.
inter_digit_timer
Sets the time delay before dialed digits are sent for normal
dialing, in seconds.
Valid values are 1 to 30.
The default is 6.
digitmap
defines a digit map string for the dial plan,
The valid value is a maximum 512-character string.
Default is “x.T|x+#”.
digitmap_tone
Defines the digit map string to deliver second dial tone for a
dial plan.
The valid value is a maximum 512-character string.
Default is blank.
DIAL
digitmap_emergency
Defines the emergency call number, see section 4.7
.
Valid value is a string up to 750 characters.
The default is blank.