Specifications

LIP-8002/8002A
iPECS Installer Guide
91
Section
Field Name
Description
call_waiting_tone
Controls audible notification when Call Waiting is enabled
Valid values are enable or disable.
Default is enable.
call_hold_ringback
Sets Held call ringback. If a user returns to idle with a call on
hold, the held line will ring.
Valid values are enable and disable.
Default is enable.
msg_waiting_tone
Controls stutter dial tone when there is a message waiting.
Valid values are enable or disable.
Default is enable.
auto_answer
Controls answering an incoming call automatically activating
the speakerphone.
Valid values are enable or disable.
Default is enable.
call_direct
Controls Hotline/Warm-Line operation. Going off-hook
automatically places a call to the designated party.
Valid values are enable or disable.
Default is disable.
call_direct_number
Defines the destination for a direct call.
Valid value is extension number.
The default is blank.
call_direct_timer
Sets the delay for Warm Line operation. After the timer
expires, the direct call is made. Set to zero (0) for Hotline.
Valid values are 0 to 10 seconds delay.
Default is 5.
phone_name
Assigns a name to the phone for idle mode display.
Valid value is a string of up to 15 characters.
The default is blank.
lang
Specifies the language displayed in the LCD. Support for a
given language is limited by the LCD type and the xml file.
Valid values are as follows:
• 0 — English
• 1 — French
• 2 — Korean
• 3 — Danish
Default is 0 (English).
lock_outgoing_call
Unlocks the phone so a password is not required to place an
outgoing call.
Valid values are 0 to unlock or 1 to lock.
Default is 0 (unlock).
use_speed_number
Assigns use of 2-digit Speed number dialing.
Valid values are 0 to disable or 1 to enable.
Default is 1 (enable).
web_server
Enables access to the Web Manager.
Valid values are 0 to disable or 1 to enable.
Default is 1 enable.
telnet_server
Enables access to the telnet server.
Valid values are 0 to disable or 1 to enable.
Default is 1 enable.
SYSTEM
function_dnd
Disables dnd function for the phone.
Valid values are disable or enable.
Default is enable.