User guide

LIP-8040E Gigabit Phone User Guide
13
2.2.4 Network Configuration
The User can review the current network configuration
or modify a new phone network configuration.
To access Network Config. settings:
 Press MENU button and 4(iPECS-LIK)/2(iPECS SBG-1000, iPECS-
MG),
 Enter the password (default=147*); the following will display:
MFIM #[1/2] ?
MFIM #1 - CHANGE[#]
 Press the # key to toggle between multiple profiles (MFIM),
 Press the VOL   buttons to advance to the next network
configuration item,
 Press the HOLD/SAVE button to save each setting.
To configure 802.1x:
 In Network Config. Menu, use VOL   buttons to locate the 802.1x
configuration screen (shown),
802.1x ?
[ENABLED] – CHANGE[#]
 Enable in 802.1x menu and press the Hold button.
 Enter ID in 802.1x USER ID menu (It appears when 802.1x is
enabled.) and press the Hold button.
 Enter Password in 802.1x PASSWORD menu (It appears when
802.1x is enabled.) and press the Hold button.
To set LLDP:
 In Network Config. Menu, use VOL   buttons to locate the LLDP
configuration screen (shown),
LLDP?
[ENABLED] – CHANGE [#]
 Enable in LLDP? menu and press the Hold/Save button.