User guide

LIP-8002E/2AE User Guide
40
8. Set Features & Flex Buttons
8.1 Entering Station Program Data
A special code set is available for iPECS Phone users
to assign certain attributes such as Authorization Codes
(Passwords). After entering the User Program mode,
dial the codes to select the attribute and setting. Once
selected, the setting is saved. A list of the User
Program codes, the feature/function and any input
required are given in Appendix B.
To assign User Programmable station attributes:
• Press TRANS/PGM,
• Dial desired User Program code,
• Press HOLD.
8.2 Assigning Features to Flex Buttons
You may assign features and functions to the Flex
buttons on your iPECS Phone. If allowed, you may
even assign CO/IP lines to the Flex buttons.
Flex buttons may be assigned for most features
providing One-Touch feature activation (e.g., a Flex
button may be assigned to access the Account Code
feature and may include the Account code digits, as a
one-touch account code button).
Features that may be assigned to a Flex button include:
DSS/BLF—Enter station number.
Flex Numbering Plan—Enter Flex Numbering Plan code
see Appendix A(Number Plan is not assigned by
default).
User Program Code – Dial “Program Mode” code or
press [TRANS/PGM] button in iPECS-LIK, iPECS
SBG-1000 and enter a User Program code, see
Appendix B,
(Program Mode code is programmed in feature
numbering plan by Administrator)
CO Line—Enter the CO line access code.
8. Set
Features &
Flex Buttons