User guide

LIP-8008E User Guide

NOTE—The mobile extension may reconnect to the transfer call by

pressing the mobile flash digit(*).

In iPECS-MG

To register a mobile phone number:

• Press the TRANS/PGM button,

• Dial 51,

• Select Mobile Index 1 or 2,

• 1 to activate, 0 to deactivate,

• Press the HOLD/SAVE button.

To activate a registered mobile phone from the user’s station:

• Press the TRANS/PGM button,

• Dial 52,

• Select Mobile Index 1 or 2,

• Dial the mobile phone number with CO Access code,

• Press the HOLD/SAVE button.

To place a call from the mobile extension using the iPECS System:

• Dial the ISDN DID number of the station; the system will check

the Caller ID and answer the call. The user then will receive

intercom dial tone,

• Place internal or external iPECS call as normal.

To Transfer a call from the mobile extension using the iPECS:

• Dial the mobile flash digit “*” while on an iPECS call,

• Dial the desired extension, the call is transferred and the

mobile phone returns to idle.