User's Manual

Technical Description and User Guide C3607w
1/1553-KRD 131 17 Uen Rev PA2 2010-11-05
 Ericsson AB 2008-2009
Ericsson Confidential
22 (38
)
If the operator settings are not available or a personalized (company-specific)
APN is in use, the information may be entered manually. Any number of
profiles may be defined (including Access Point Name, Username and
Password). Quality of Service parameters is set to “network default”.
6.1.2.2.2 Connection Operation
No user interaction is required to set the speed of the connection. It will be
automatically set by the network depending on available network resources
and the user’s subscription.
C3607w will automatically use the UMTS network by preference and
automatically switch over to GPRS/EDGE where the operator has an
integrated UMTS/GSM network if UMTS coverage is not available. When
UMTS coverage returns, the connection will return to the UMTS network. In
some networks, data flow must be paused. C3607w therefore needs to return
to an idle state before a return to UMTS can take place. This is network-
specific.
Similarly, if HSPA is available in the UMTS network, the higher download
speeds will be automatically available. In some networks, it is not possible to
detect HSPA until a connection is made.
6.1.2.2.3 IP Number Allocation
C3607w enables you to work within your corporate and/or ISP-assigned IP
numbering scheme. It supports dynamic IP allocation. Dynamic IP allocation is
normally used by both ISPs and corporate networks.
6.1.2.3 Help
The Wireless Manager has a built in help function. The help window is started
by clicking on help in the main window, or by pressing function key F1.