User's Guide
Table Of Contents
- 1 Introduction
- 1.1 Structure of this Guide
- 1.2 Related Documents
- 2 W3x Series Overview
- 3 Configuration and Management
- 3.1 Access and Login to the Web User Interface
- 3.2 Overview
- 3.3 Wireless LAN Configuration Wizard
- 3.4 Internet
- 3.5 LAN
- 3.6 Wireless LAN
- 3.7 NAT
- 3.8 File and Printer Sharing
- 3.9 System
- 3.10 Event Log
- 3.11 Change Password
- 3.12 Logout
- 4 Telephony and Fax (W35 only)
- 5 Battery (W35 only)
- 6 PC Configuration
- 7 Troubleshooting
- Glossary
W3x Series Overview
The interfaces are described in the tables below:
Table 1 – Ericsson W3x back side interfaces
Label Description
Ethernet LAN connectors for connecting client PCs to the
Ericsson W3x.
Ethernet
1-4
Power input for connecting the provided power supply
adapter or an optional external battery pack (Ericsson W35
only).
10-28VDC
A small hole in the housing used to restore the Ericsson
W3x configuration to factory default settings. The following
procedure resets all configurable values back to factory
default, including the login user name and password.
Reset
1. Press the Reset button with the tip of a pen. The
Standby button starts blinking.
2. Wait until the Standby button shows steady blue
which indicates that the reset is finished.
In addition to the above, the Ericsson W35 also includes interfaces for
telephony and fax services.
Note: Telephony and fax services must be supported by the
subscription/network in order to work.
The interfaces are described in the tables below:
Table 2 – Additional back side interfaces on Ericsson W35
Label Description
Telephone connector, for connecting an analog telephone
to the Ericsson W35.
Phone
Telephone/Fax connector, for connecting a fax machine to
the Ericsson W35.
Phone/Fax
8 1/1551-CRH 102 168 Uen Rev PA2 2008-11-12