User's Guide
Table Of Contents
- 1 Introduction
- 1.1 Structure of this Guide
- 1.2 Related Documents
- 2 W3x Series Overview
- 3 Configuration and Management
- 3.1 Access and Login to the Web User Interface
- 3.2 Overview
- 3.3 Wireless LAN Configuration Wizard
- 3.4 Internet
- 3.5 LAN
- 3.6 Wireless LAN
- 3.7 NAT
- 3.8 File and Printer Sharing
- 3.9 System
- 3.10 Event Log
- 3.11 Change Password
- 3.12 Logout
- 4 Telephony and Fax (W35 only)
- 5 Battery (W35 only)
- 6 PC Configuration
- 7 Troubleshooting
- Glossary
Configuration and Management
3.1.1 Enter PIN code
The SIM card contains information about the subscription and is normally
protected by a PIN (Personal Identification Number) code and a PUK
(Personal Unblock Key) code.
Normally, you have to enter a PIN code to activate the SIM card. In some
cases, however, PIN authentication is not required and it is possible to use
the SIM card without entering a PIN code.
The Enter PIN code page is displayed if a PIN code is required:
Figure 9 - Enter PIN code page
Enter the PIN code (provided with the SIM card).
You can also check “Remember my PIN” to have automatic SIM
authentication in case of a system restart.
Click the Apply button to save the settings.
3.1.2 Enter Password
If a PIN code is not needed for SIM authentication, or if automatic SIM
authentication is enabled, the Enter password page is displayed:
1/1551-CRH 102 168 Uen Rev PA2 2008-11-12
15