User's Guide
Table Of Contents
- 1 Introduction
- 1.1 Structure of this Guide
- 1.2 Related Documents
- 2 W3x Series Overview
- 3 Configuration and Management
- 3.1 Access and Login to the Web User Interface
- 3.2 Overview
- 3.3 Wireless LAN Configuration Wizard
- 3.4 Internet
- 3.5 LAN
- 3.6 Wireless LAN
- 3.7 NAT
- 3.8 File and Printer Sharing
- 3.9 System
- 3.10 Event Log
- 3.11 Change Password
- 3.12 Logout
- 4 Telephony and Fax (W35 only)
- 5 Battery (W35 only)
- 6 PC Configuration
- 7 Troubleshooting
- Glossary
W3x Series Overview
2.5.3 Right Side Interface
The right side of the Ericsson W3x is equipped with an antenna connector
(type MCX) for connecting an optional external antenna.
Figure 6 – Ericsson W3x right side
2.5.4 Front Panel
The front panel of the Ericsson W3x includes a signal quality indicator, LED
indicators and a Standby button as described below.
2.5.4.1 Signal Quality Indicator
The signal quality indicator shows the quality of the signal from the mobile
network. The more segments displayed in the bar graph, the stronger the
signal.
The symbol in the centre of the graph ( ) is blinking when searching for
a mobile network connection and when a connection is established, it
indicates the following:
• When 3G is displayed there is a connection to a UMTS network.
• 3G with a + sign indicates connection to a HSPA network.
• When the 3G symbol is unlit and the segment bar displays signal,
there is a connection to a GSM/GPRS/EDGE (2G) network.
10 1/1551-CRH 102 168 Uen Rev PA2 2008-11-12