User's Guide
Table Of Contents
- 1 Introduction
- 1.1 Structure of this Guide
- 1.2 Related Documents
- 2 W3x Series Overview
- 3 Configuration and Management
- 3.1 Access and Login to the Web User Interface
- 3.2 Overview
- 3.3 Wireless LAN Configuration Wizard
- 3.4 Internet
- 3.5 LAN
- 3.6 Wireless LAN
- 3.7 NAT
- 3.8 File and Printer Sharing
- 3.9 System
- 3.10 Event Log
- 3.11 Change Password
- 3.12 Logout
- 4 Telephony and Fax (W35 only)
- 5 Battery (W35 only)
- 6 PC Configuration
- 7 Troubleshooting
- Glossary
W3x Series Overview
2.5.4.4 Built-in Ethernet Indicators
The Ethernet LAN connectors (Ethernet 1-4) have two built-in indicators
each.
The left indicator shows the speed of data traffic between the Ericsson W25
and the connected client. If the speed is 100 Mbps, the indicator is green.
When the indicator is unlit, the speed is 10 Mbps.
The indicator to the right is yellow when a LAN connection is established
and flashes to show data traffic activity.
2.5.4.5 Standby Button
The Standby button at the bottom of the front shows steady blue when
the Ericsson W3x has finished the start-up procedure.
The button can be pressed to switch the Ericsson W3x to a standby (low-
power) mode (equal to when the Ericsson W35 is running on optional
battery power). The button shows red when the unit is in standby mode and
only phone services are available.
1/1551-CRH 102 168 Uen Rev PA2 2008-11-12
13