User's Manual

Handling Paper and Other Media | 51

•

Choose if you’re printing on canvas or other heavy media. Media

that is too thick may damage the cutter. Use of an external cutter/scissor

is recommended.

Also choose this setting if you want to print a series of pages and keep

them together for cutting later on. The following media (and other

similar materials) do not work with, or may shorten the life of, the

built-in cutter:

• Fine art paper

• Canvas

• Vinyl

• Matte board

• Heavyweight polyester banner media

Removing and Installing the Spacer

When you perform borderless printing on roll paper, you may need to install

the borderless printing spacer supplied with the printer, depending on the

width of the paper.

Installing the Spacer

1. Remove the black paper stop from the spindle. When the 3-inch core

adapters are attached to the spindle, remove both left and right adapters.

2. Install the borderless printing spacer onto the gray paper stop. Push the

spacer until the holes line up with the holes in the paper stop.

Removing the Spacer

1. Remove the black paper stop from the spindle.