Operation Manual

Personalizing Your Phone 39
Personalizing Your Phone
You can choose to set your phone completely silent so that all signals except
the alarm and timer signals are turned off.
To set the phone silent
1. From standby, press and hold
C.
2.
Silent on? appears. Press YES.
An icon appears in standby.
To cancel, repeat step 1 and press
YES at Silent off? .
You can set the volume in six steps. The first step means that two clicks
are heard when you receive a call. You can also turn the ring signal off (0).
An icon then appears in standby.
To set the ring signal volume
1. Scroll to
Settings , YES, Sounds & Alerts , YES, Ring Volume , YES.
The level of the ring volume appears in the display.
2. Use
u to increase the volume, d to decrease it.
The phone rings once with the actual setting as you increase the volume.
3. Press
YES to save the setting.
Tip! Use the volume key on the side of the phone to change the volume of the
ring signal silently.
Youcanchoosearingsignalthatrisesinstepsfromthesoftestvolumetothe
loudest, Increasing Ring.
To set the ring signal to Increasing Ring
1. Scroll to
Settings , YES, Sounds & Alerts , YES, Increasing ring , YES.
2. Select
On .
The Increasing ring must be Off for the ring signal volume to apply.
Note! If the phone is set to silent, the increasing ring signal is not heard.
Silent
Ring Signal Volume
Increasing Ring