Operation Manual

Handling More than One Call Simultaneously 67
Connect the two calls (Call Transfer)
• Scroll to
Call Handling , YES, Transfer call , YES.
The two calls are now connected to each other, and you are disconnected
from both calls.
Note! The Call Transfer service may not be available on all networks.
Join the two calls into a Conference Call
• Scroll to
Call Handling , YES, Join calls , YES.
See ‘Conference Calls’ below.
If the Call Waiting service is on, you may receive a third call when you have
one active call and a second call on hold. From now on, you cannot answer any
more calls without disconnecting one, if you do not want to create a conference
call. You hear a tone in the earpiece and
Busy and Release&Answer appear in
the display.
You can do one of the following:
End the current call and accept the waiting call
• Select
Release&Answer .
The waiting call becomes active and the call on hold remains on hold.
Reject the waiting call
• Select
Busy .
The third call is rejected. Provided the caller’s network supports this
function, the caller hears a busy signal.
Create a conference call
• See below
Note! The Conference Call service may not be available on all networks.
A conference call is a call with more than two participants. As in an ordinary
conference, all participants can hear each other at the same time. You may
include up to five participants in a conference call.
Creating a Conference Call
To create a conference call, you must have one active call and one call on hold.
To join the two calls into a conference call
• Scroll to
Call Handling , YES, Join calls , YES.
You have now created a conference call (with yourself and the active and
held calls).
Receiving a Third Call
Conference Calls