Operation Manual
Table Of Contents
- Preparing Your Phone for Use
- Turning Your Phone On and Off
- Display Information and Key Functions
- Making and ReceivingCalls
- During a Call
- T28 WORLD Features
- Using the Menus
- Your Personal PhoneBook
- Using the Call List
- Your Voice Mail Service
- Personalizing Your Phone
- Sending and Receiving Text Messages(SMS)
- Forwarding Incoming Calls
- Security for YourPhone and Subscription
- Handling More than One Call Simultaneously
- Setting Network Preferences
- Knowing the Call Time/ Call Cost
- Using Two Voice Lines
- Voice Control
- CallingCard Calls
- Sending and Receiving Fax and Data Calls
- Extras
- The Profile Concept
- Accessories
- Online Services
- Quick Keys
- Troubleshooting
- Ericsson Mobile Internet
- Technical Data
- Glossary
- Guidelines for Safe andEfficient Use
- Limited Warranty
- Declaration ofConformity
- Index
78 Voice Control
Instead of pressing and holding YES, as in step 1 above, you can slide and
hold the volume key when the flip is open. A third alternative is to initiate
voice dialing by just opening the flip, but then Start on Open must be on.
To turn on Start on Open
1. Scroll to
Settings
, YES,
Voice Control
, YES,
Start onOpen
, YES.
2. Select
On
.
When Start on Open is on, an icon appears in standby.
When connected to a portable or vehicle handsfree unit, you can answer or
reject incoming calls by using your voice.
Before you can use voice answering, you need to turn on the voice answering
function and record your voice commands.
To turn on Voice Answering
1. Scroll to
Settings
, YES,
Handsfree
, YES,
Voice Answer
, YES.
2. Select
On
.
You now have to train your phone to recognize your voice answering
commands.
3. Press
YES to continue.
4. Follow the instructions in the phone display, i.e. say the word Answer and
press
YES to save your recording. (Use the microphone of the Handsfree
unit.) If the recording was not OK, repeat step 3.
5. Say the word Busy and press
YES to save your recordings.
Note! If you prefer, you can use other words instead of ‘Answer’ and ‘Busy’.
To answer an incoming call using your voice
• When the phone rings, say the word Answer.
The word Answer is played back to you and the call will be connected.
To reject an incoming call
• When the phone rings, say the word Busy.
The word Busy is played back to you, and the call is rejected, i.e. the caller
hears a busy signal.
Note! For more information about handsfree units, see “Portable Handsfree”
on page 92 and “Vehicle Handsfree” on page 93.
Voice Answering