Operation Manual

88 The Profile Concept
The table below shows the settings of each profile.
You can always choose a profile manually.
To select a profile manually
1. Scroll to
Settings , YES, Profiles , YES, SelectProfile , YES.
2. Select the profile you want.
You c an a ls o f in d Select Profile in the My Shortcuts menu. The quickest way
to reach this sub-menu is to press and hold
u.
If you choose a profile other than Normal,aniconisshowninstandby.
Note! A profile which is not linked with any accessory, such as Meeting or
Normal, must be chosen manually, even if automatic activation is on.
The profiles linked with accessories can be chosen automatically.
See “Accessories” on page 90.
You can re-name the pre-programmed profiles and change the settings
according to your wishes.
To change the name of a profile
1. Scroll to
Settings , YES, Profiles , YES, Profile name , YES.
2. Enter a new name and press
YES.
Normal Meeting In car Outdoors Prt
Handsfree
Home
Ring Volume
5(6) 0(6) 6(6) 6(6) 6(6) 5(6)
Increasing ring
Off Off Off Off Off Off
Vibrate Mode
On On if silent Off On On Off
Call screening
Accept
All Calls
Accept All
Calls
Accept All
Calls
Accept All
Calls
Accept All
Calls
Accept All
Calls
Forward
Off Off Off Off Off Off
CallingCards
None None None None None None
Display Light
Auto Auto On Auto Auto Auto
Line 1/2
L1 L1 L1 L1 L1 L1
Silent
Off On Off Off Off Off
Auto Activation
Off Off On Off On Off
Accessories
- - Vehicle HF - Handsfree -
Changing the profile settings