User guide

Using your Sony Ericsson T68/T68i/T610/T616/Z600 with the Logitech wireless hub
I’m having problems synchronizing
If you are getting errors when synchronizing, try the following:
Make sure that your mobile phone is not connected to another Bluetooth
device. You cannot synchronize unless your mobile phone is connected to
your computer only.
Check that your mobile phone is paired to your computer before you start
synchronization. Look in My Bluetooth Places and locate the device icon for
your Sony Ericsson T68/T68i/T610/T616/Z600:
The
(Windows
2000) or (Windows
XP) device icon is displayed if
it is paired.
If your mobile phone is not paired before you start synchronization you may
get an error message, such as a ‘General OBEX error message.
Press the Connect button on the front of your Bluetooth
wireless hub, and
follow the on-screen instructions.
If your mobile phone is configured to receive immediate notification then you
cannot start synchronization because your mobile phone and your computer
are connected. You need to switch off immediate notification. See Receive
notification of a new text (SMS) message
, page 26, for details.
If you think that the synchronization is taking too long, bear in mind that the
first time you synchronize your mobile phone with your computer it can
typically take up to fifteen minutes. Subsequent synchronizations take much
less time.
Finally, if none of the above works, try switching your mobile phone off and
back on again.
When a computer's audio gateway/headset service is connected,
synchronization / sending file may not be successful.
Bear in mind that while synchronizing you cannot receive notification of text
messages or calls.
© 2003 Logitech, Inc.
37