Installation Guide ONE-PIECE TOILET
Installation Guide Prior to Unpacking Overall package weighs over 100 pounds! Two people are required to carefully unpack the product to avoid personal injuries or accidental damage to the item. Each item is carefully packed in customized foam. However, violent handling and shipping might crack the item. Observe potential damage while unpacking. TEAM LIFT The tank lid is separately placed between foam for protection in transit. Unpack with care. The seat cover might not be hinged with the toilet base.
Installation Guide Checklist What’s in the Box a. One-Piece Toilet b. Fill Valve Kit (pre-assembled) c. Toilet Seat d. Tank Lid e. Wax Ring Gasket f. Mounting Bolts g. Cover Caps Extra Parts/Tools Required i. Supply Line ii. Closet Flange & Bolts iii. Safety Glass iv. Tape Measure v. Adjustable Wrench vi. Screwdriver vii. Putty Scraper viii. Pencil/Marker Extra Tools Optional ix. Soft Cloth / Tarp x. Paper Towels xi. Disposable Gloves xii. Bucket xiii.
Installation Guide Installation Remove Old Toilet a) To replace the original toilet, shut off the water supply valve and flush tank completely. Disconnect and remove the supply line. b) Clear the sealant around the toilet base, unscrew the bolts, and remove the toilet. c) Remove closet bolts from the toilet flange and clean wax and putty using putty knife. Clean the floor. Confirm Rough-in & Levelness a) Measure the distance from the wall to the centerline of the flange.
Installation Guide b) Apply the wax ring gasket evenly around the rear of the trapway. c) Apply a thin bead of sealant around the toilet base. REMINDER Consider placing a tarp over the floor for surface protection. Position Toilet onto Flange a) Unplug the floor opening and position the toilet on the flange so the closet bolts project through the pre-drilled holes around the rear of the toilet trapway.
Installation Guide Check for Leaks a) Connect the supply line to the fill valve at the back of the toilet. b) Flush test. Make sure there is no leak from the waterline or the flange. c) Assemble cover caps. Attach to the side holes of the toilet and tighten with a screwdriver. Toilet Seats 2 1 3 Quick-release Models For quick-release models: To quickly remove the seat, press the button and gently pull the seat from the attached hinges.
Maintenance Guide Eridanus toilets are meticulously constructed with solid vitreous china and have undergone strict quality inspections. With proper care and cleaning measures, Eridanus toilets will keep in new condition and function well for an extended period of time. General Care It's recommended to clean Eridanus toilets on a regular basis to avoid grime and mineral build-ups or deposits. Shut off water supply and clear up tank and fittings once in a while to maintain best flushing performance.
Installation Guide © COPYRIGHT 2023 ERIDANUS
