Submittal Sheet

AGxx, AHxx Series
13
Specifications
Typical Applications
Figure 1 Typical Wiring/Erie Terminal Block.
Figure 2 Typical Wiring of a PopTop with Wire Leads.
Inputs
Control signal On/off, 2 position SPST, spring return.
Power 6.5 watts 7.5 VA @ 50/60 Hz.
End Switch 24-240 Vac/101 mA minimum to 5A maximum and 90-30 Vdc@ 100 mA maximum.
Outputs
Motor Type Hysteresis synchronous.
Mechanical
Control action: 2-way accepts N.O or N.C. actuator, 3-way N.C. (piping determines N.O./N.C. status of
flow to coil.)
Timing:
Environment
Ambient temperature limits Refer to Model Chart.
Humidity 5 to 95% RH, non-condensing.
Agency Listings
Actuator only: CUL #MH25807, CE compliant, C-Tick Declaration (N2223).
Actuator/Valve Assembly: UL #Mp916, CE Compliant.
European Community EMC Directive (89/336/EEC). Low Voltage Directive (72/23/EEC).
General Instructions Refer to F-27384 Valve Catalog, Zone Valve section.
THERMOSTAT
BURNER
CONTROL
TH
TR
ES
ES
TH/TR
T
T
L1
L2
1 ES = End switch (optional)
1
Motor
End SwitchRed
To Aux. Circuit
Red
Black
Black
L1
(HOT)
L2
Invensys - Erie Wire Leads
THERMOSTAT