Instructions / Assembly

1. Find the correct frame pieces.
Matching each letter to corresponding
one:
2. Insert the brackets into the frame and make
sure the pin gets into the hole.
3. Tighten the brackets screws equally
until there is no gap between frames.
4. For low bottom track use the longer
screws that came with frame and screw
from behind side piece into the bottom
track.
Frame Assembly
Once frame is assembled, place it by the installation
location and check the opening size and Floor level
• Recommended opening size is overall frame size
+1/2” .
• Check the door’s specs sheet to make sure frame
is facing correct way.
• For outswing doors hinge holes will be toward
outside of building and wider side of frame will
be toward inside.
• For Inswing doors Hinge holes will be toward
inside and wider side of frame will be toward
outside.
• Drain holes in bottom track will always toward
outside.