Datasheet

Guide elements for mounting through wiring fields
with connector types
B, C, D, E, F, H 11, H 15, Q, R
In a similar way to front-mounted connectors, this interface
Explanation - Installation possibilities
System also provides for making mateable interC0nne~-
pas, 1 The guide elements are fitted to the motherboard
tions directly from the wiring field to a printed circuit board.
support. Alternatively, by fitting suitable spacer
The guide elements are mounted on the rails of a subrack
washers (included in the set), the guide elements
and serve to locate the
PC0 in the rack.
can be fitted directly
to a subrack.
Pos. 2 For power connections, the female half is mounted
in the cable housing and the male half and PC0 in
the
subrack to provide protection against accidental
contact.
Pos.
3 Similar to the front-panel mounting, it is also possi-
ble to fit female connectors with right-angled termi-
nations or reversed female connectors on the prin-
ted circuit board (male connector in the cable hou-
sing).
Pos. 4The guide elements are also suitable for cable hou-
sings KSG
253 (female connector in the cable hou-
sing).