User Manual

2 Catalog E 023975 10/09 Edition 2 www.erni.com
• Fully insulated housing
• Two-shell design to facilitate assembly
• Various types of locking such as snap-in, slide and
screw locking
• Reliable strain relief with strain relief clamp
• Cable entry:
KSG 200 one 15°entry
KSG 185 sizes 9 and 15, one 75° entry sizes 25, 37 and
50 two 75° entries
KSG 183 size 9, one 90° entry-sizes 15, 25, 37 and 50,
three 30° and 90° entries
• Cable sleeves and blind plugs included
• All parts needed to mount the housing are supplied
• KSG 200 with optimal ESD-protection and high
EMI/RFI shielding
• KSG 200 with integrated shielding plates
• KSG 185 with integrated coding
• KSG 185 available in metallized version as well
Features
ERNI offers three different versions of connector housing for
Series TMC connectors acc. To DIN 41 652 and MIL C-24308.
• KSG 200 Fully insulated housing with integrated
shielding plates
• KSG 185 Housing with snap-in latches and/or screw
locking, integrated coding
• KSG 183 Housing with snap-in latches
All three versions of housing are of two-shell design which
allows the wring of the female or male connectors prior to
housing assembly. All three housing versions can easily be
disassembled.
With the KSG 185 (cable connector housing Series KSG 185)
it is possible to lock the two shell halves with snap- in latches.
There is also a screw for vibration-proof applications.
The connector shell halves of Series KSG 183 are screwed
together after wiring.
For applications with screw locking the KSG 185 offers
locking parts for thread types M3 and #4/40 NC-2 A.
General
Cable Connector Housings for D-Sub Connectors
Housing Versions KSG 200, KSG 185 and KSG 183