SMC 1.27 mm Connectors Ed. 08 | 09.
SMC - 1.27 mm Connectors DUAL ROW CONNECTOR GENERAL SMC: Connectors for all applications Small Grid, Big Possibilities Limited space and high performance demands are characteristics of many modern electronic systems, all of which the connectors must accommodate. There is a corresponding demand for compact, secure, and reliable connectors, with high signal integrity and a relatively high current-carrying capacity. The comprehensive SMC range helps meet these requirements.
SMC - 1.27 mm Connectors CONCEPT FEATURES Pitch 1.27 mm No. of Pins 12, 16, 20, 26, 32, 40, 50, 68, 80 Termination technology SMT, individual variants in Pressfit technology Applications Data rate up to 3 Gbit/s Current rating up to 1.
SMC - 1.27 mm Connectors CONCEPT CAPABILITIES Stacked boards (Mezzanine) Board-to-board adapter: enhanced board-to-board heights Extender card (coplanar) 4 Catalog E 074473 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors CONCEPT CAPABILITIES Orthogonal boards Wire-to-board (pluggable) Wire-to-board (permanent): Board-on IDC Catalog E 074473 09/14 Edition 8 www.erni.
SMC - 1.
SMC - 1.27 mm Connectors ADVANTAGES ROBUST SOLDER CLIPS • outstanding retention forces on the circuit board • soldering brackets absorb mechanical stress and are able to withstand high shock and vibration loads • documented shear and tear-off forces build trust in surface-mounted connectors (e.g., shear force: min. 1000 N; tear-off force: min.
SMC - 1.27 mm Connectors ADVANTAGES SNAP-IN B-TO-B ADAPTER • single-sided locking of board-to-board adapters on low-profile female connectors • enables the mating and release of two boards always on one specified side LOCATING PEGS • geometrically heterogeneous locating pegs for precise positioning on the circuit board • enables best possible compensation of PCB holes for both positive and negative tolerances 8 Catalog E 074473 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors PROCESSING TAPE AND REEL PACKAGING transport safe packaging and fully automatic assembly FULLY AUTOMATIC ASSEMBLY AND REFLOW SOLDERING for efficient processing on modern assembly lines Catalog E 074473 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors PROCESSING BACKSIDE REFLOW SOLDERING a challenge, especially for angled connectors PERMANENT WIRE-TO-BOARD CONNECTION (BOARD-ON IDC) automated and cost-efficient assembly of ribbon cables 10 Catalog E 074473 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors BOARD-ON IDC PERMANENT WIRE-TO-BOARD CONNECTION fully automated assembly press-in without special tool Catalog E 074473 09/14 Edition 8 feeding of the ribbon cable and cable guide processed connection www.erni.
SMC - 1.27 mm Connectors MATING CONDITIONS ALLOWED INCLINATION FOR A SECURE SELF-CENTERING 1) 1) depends on No. of Pins and misalignment tolerance ALLOWED MISALIGNMENT TOLERANCES FOR A SECURE SELF-CENTERING 12 Catalog E 074473 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors BOARD-TO-BOARD HEIGHT STACKED BOARDS / MEZZANINE Board-to-Board Height 09/14 Female Stacking Height 8.00 - 9.50 mm 1.75 6.25 9.50 - 11.0 mm 3.25 6.25 10.80 - 12.30 mm 1.75 9.05 12.30 - 13.80 mm 3.25 9.05 13.90 - 15.40 mm 4.85 9.05 15.40 - 16.90 mm 1.75 13.65 16.90 - 18.40 mm 3.25 13.65 18.50 - 20.00 mm 4.85 13.
SMC - 1.27 mm Connectors CHARACTERISTICS TECHNICAL DATA Description Standard PCB Connectors, Cable Assemblies, B-to-B Adapter Climate category DIN EN 60068-1 test b 55 / 150 / 56 55 / 125 / 56 -55 / 125 °C (PCB Connectors) -55 / 105 °C (Cable Assemblies) -55 / 105 °C Temperature range Current rating per contact IEC60512 test 5b Board-on IDC (Ribbon Cable AWG 30, 250 mm) 12-pin version at 20 °C ambient temperature: 1.7 A (up to 2.
SMC - 1.27 mm Connectors CHARACTERISTICS Description Standard PCB Connectors, Cable Assemblies, B-to-B Adapter Board-on IDC (Ribbon Cable AWG 30, 250 mm) Mechanical operation IEC 60512 test 9a 500 mating cycles Insertion and withdrawal force IEC 60512 test 13b 0.5 N per contact Gauge retention force IEC 60512 test 16e > 0.1 N Processing Conditions Hand soldering temperature max. IEC 60068-2-20 3.5 s at 350 °C Dip soldering temperature max.
SMC - 1.27 mm Connectors CABLE CHARACTERISTICS 0,64 TECHNICAL DATA FLAT RIBBON CABLES 0,635 Description Standard cable (PVC) High Temperature Cable (TPE-S) Cross section Halogen-free Cable (Polyolefin TPE-O) AWG-30/ 7/ 0.06 mm2 Conductor stranded Cu wire, tinned, 7x0.102 / 0.06 mm2 Coded wire available Insulation PVC gray (similar to RAL 78032) TPE-S gray (similar to RAL 78032) TPE-O gray (similar to RAL 78032) min. 0.
SMC - 1.27 mm Connectors HIGH FREQUENCY CHARACTERISTICS HIGH-SPEED DATA TRANSMISSION SMC connectors as solution for unshielded high-speed applications. The practically continuous impedance profile allows for secure data transmission rates of up to 3 Gbit/s (differential) if the system is suitably designed.
SMC - 1.27 mm Connectors RIGHT ANGLE MALE PRODUCT SPECIFICATION • SMT termination • dual row connector • data rates up to 3 Gbit/s • location pegs for exact board placement • black insulation body for fast and reliable visual recognition • fully automated board assembly DIMENSIONAL DRAWINGS 1,27 4,25 1,6 0,8 1,2 0,3 2 2,2 A 10 B C 18 12 10.77 12.70 10.35 16 13.31 15.24 12.91 20 15.85 17.78 15.45 26 19.66 21.59 19.26 32 23.47 25.40 23.07 40 28.55 30.48 28.15 50 34.
SMC - 1.27 mm Connectors RIGHT ANGLE MALE ORDERING INFORMATION Catalog E 074473 No. of Pins Packaging Part Number 12 Tape and reel 154763 16 Tape and reel 354094 20 Tape and reel 354095 26 Tape and reel 154764 32 Tape and reel 354096 40 Tape and reel 354097 50 Tape and reel 154765 68 Tape and reel 154766 80 Tape and reel 154767 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors RIGHT ANGLE FEMALE PRODUCT SPECIFICATION • SMT termination • dual row connector • data rates up to 3 Gbit/s • location pegs for exact board placement • black insulation body for fast and reliable visual recognition • fully automated board assembly DIMENSIONAL DRAWINGS C Recommended Layout 1,27 1,2 0,8 0,3 2 2,2 A 10,8 B 12 10.77 12.70 9.37 16 13.31 15.24 11.91 20 15.85 17.78 14.45 26 19.66 21.59 18.26 32 23.47 25.40 22.07 40 28.55 30.48 27.
SMC - 1.27 mm Connectors RIGHT ANGLE FEMALE ORDERING INFORMATION Catalog E 074473 No. of Pins Packaging Part Number 12 Tape and reel 154740 16 Tape and reel 354078 20 Tape and reel 354079 26 Tape and reel 154741 32 Tape and reel 354080 40 Tape and reel 354081 50 Tape and reel 154742 68 Tape and reel 154743 80 Tape and reel 154744 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors VERTICAL MALE PRODUCT SPECIFICATION • SMT termination • dual row connector • datarate up to 3 Gbit/s • location pegs for exact board placement • black insulation body for fast and reliable visual recognition • fully automated board assembly • 3 stacking heights (1.75, 3.25, 4.85 mm) DIMENSIONAL DRAWINGS Unmated Stacking Height 3.25 mm C Recommended Layout 2,21 1,27 1,1 5,5 2,2 7,6 8,25 a1 A 0,3 1,27 7,2 1,27 B 22 12 10.77 12.70 10.37 16 13.31 15.24 12.
SMC - 1.27 mm Connectors VERTICAL MALE ORDERING INFORMATION Catalog E 074473 No. of Pins Unmated Stacking Height Packaging Part Number 12 1.75 Tape and reel 244836 16 1.75 Tape and reel 254587 20 1.75 Tape and reel 254588 26 1.75 Tape and reel 244837 32 1.75 Tape and reel 254589 40 1.75 Tape and reel 254590 50 1.75 Tape and reel 244838 68 1.75 Tape and reel 244839 80 1.75 Tape and reel 244840 12 3.25 Tape and reel 244854 16 3.25 Tape and reel 254536 20 3.
SMC - 1.27 mm Connectors VERTICAL MALE 24 No. of Pins Unmated Stacking Height Packaging Part Number 12 4.85 Tape and reel 234206 16 4.85 Tape and reel 254414 20 4.85 Tape and reel 254415 26 4.85 Tape and reel 234207 32 4.85 Tape and reel 254416 40 4.85 Tape and reel 254417 50 4.85 Tape and reel 234208 68 4.85 Tape and reel 234209 80 4.85 Tape and reel 234210 Catalog E 074473 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors VERTICAL MALE PRESSFIT PRODUCT SPECIFICATION • pressfit termination • dual row connector • data rates up to 3 Gbit/s • black insulation body for fast and reliable visual recognition • fully automated board assembly • stacking height 3.25 mm DIMENSIONAL DRAWINGS 4,2 Recommended Layout 1,27 A 10,95 8,2 1,27 Hole Design 1,27 1,27 Catalog E 074473 09/14 Edition 8 12 10.35 26 19.24 50 34.48 68 45.91 80 53.53 No. of contacts A 0,7 0,02 0,6 0,05 min. 0,1 min.
SMC - 1.27 mm Connectors VERTICAL MALE PRESSFIT ORDERING INFORMATION 26 No. of Pins Unmated Stacking Height Packaging Part Number 12 3.25 Tube 064002 26 3.25 Tube 064003 50 3.25 Tube 064004 68 3.25 Tube 144183 80 3.25 Tube 144185 Catalog E 074473 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors VERTICAL FEMALE PRODUCT SPECIFICATION • SMT termination • dual row connector • data rates up to 3 Gbit/s • location pegs for exact board placement • black insulation body for fast and reliable visual recognition • fully automated board assembly • 3 stacking heights (6.25, 9.05, 13.65 mm) DIMENSIONAL DRAWINGS Unmated Stacking Height 9.05 mm Recommended Layout 2,21 1,27 1,1 5,5 2,2 7,6 9,05 a1 A 7,2 1,27 1,27 C 10.77 12.70 9.37 13.31 15.24 11.91 20 15.85 17.
SMC - 1.27 mm Connectors VERTICAL FEMALE ORDERING INFORMATION 28 No. of Pins Unmated Stacking Height Packaging Part Number 12 6.25 Tape and reel 154805 16 6.25 Tape and reel 354055 20 6.25 Tape and reel 354056 26 6.25 Tape and reel 154806 32 6.25 Tape and reel 354057 40 6.25 Tape and reel 204632 50 6.25 Tape and reel 154807 68 6.25 Tape and reel 154808 80 6.25 Tape and reel 154809 12 9.05 Tape and reel 154717 16 9.05 Tape and reel 354062 20 9.
SMC - 1.27 mm Connectors VERTICAL FEMALE Catalog E 074473 No. of Pins Unmated Stacking Height Packaging Part Number 12 13.65 Tape and reel 234198 16 13.65 Tape and reel 354070 20 13.65 Tape and reel 354071 26 13.65 Tape and reel 204763 32 13.65 Tape and reel 354072 40 13.65 Tape and reel 354073 50 13.65 Tape and reel 234199 68 13.65 Tape and reel 234200 80 13.65 Tape and reel 234201 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors RIGHT ANGLE MALE WITH LOCKING SYSTEM PRODUCT SPECIFICATION • SMT termination • dual row connector • data rates up to 3 Gbit/s • location pegs for exact board placement • fully automated board assembly • with integrated locking feature, color-coded DIMENSIONAL DRAWINGS 1,27 1,27 2,2 7,6 2 10,77 1,6 -0,03 0,3 1,2 0,8 10 12,7 10,37 30 1,27 2,21 4,25 1,27 Recommended Layout Catalog E 074473 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors RIGHT ANGLE MALE WITH LOCKING SYSTEM ORDERING INFORMATION Catalog E 074473 No. of Pins Packaging Part Number 12 Tape and reel 254273 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors RIGHT ANGLE FEMALE WITH LOCKING SYSTEM PRODUCT SPECIFICATION • SMT termination • dual row connector • data rates up to 3 Gbit/s • location pegs for exact board placement • fully automated board assembly • with integrated locking feature, color-coded DIMENSIONAL DRAWINGS 1,27 2,2 7,6 2 10,77 1,27 1,6 -0,03 0,3 1,2 12,7 0,8 9,37 32 1,27 2,21 4,25 1,27 Recommended Layout Catalog E 074473 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors RIGHT ANGLE FEMALE WITH LOCKING SYSTEM ORDERING INFORMATION Catalog E 074473 No. of Pins Packaging Part Number 12 Tape and reel 254262 09/14 Edition 8 www.erni.
SMC - 1.27 mm Connectors BOARD-TO-BOARD ADAPTER PRODUCT SPECIFICATION • Board-to-board Adapter for parallel PCB distances of 20-40 mm • moulded (hotmelt) versions for improved environmental resistance and finger safe protection • single-sided locking of board-to-board adapters on low-profile female connectors • enables the mating and release of two boards always on one specified side DIMENSIONAL DRAWINGS 1,27 5 1,27 an B C A 12 32 50 68 80 10,37 19,26 34,5 45,93 53,55 No.
SMC - 1.27 mm Connectors BOARD-TO-BOARD ADAPTER ORDERING INFORMATION No.
SMC - 1.27 mm Connectors BOARD-TO-BOARD ADAPTER No.
SMC - 1.27 mm Connectors BOARD-TO-BOARD ADAPTER No. of Pins Board Distance Packaging Part Number 68 36 Tray 364723 68 38 Tray 364724 80 20 Tray 364725 80 22 Tray 364726 80 24 Tray 364727 80 26 Tray 364728 80 28 Tray 364729 80 30 Tray 364730 80 32 Tray 364731 80 34 Tray 364732 80 36 Tray 364733 80 38 Tray 354030 Board-to-board distance 40 mm: Board-to-board Adapter 38 with reduced wipe length, on request Moulded Versions Catalog E 074473 No.
SMC - 1.27 mm Connectors BOARD-ON IDC PRODUCT SPECIFICATION • permanent wire-to-board connection • SMT and IDC termination • dual row connector • data rates up to 3 Gbit/s • location pegs for exact board placement • black insulation body for fast and reliable visual recognition • flat ribbon cables AWG 30 • easy assembly with standard toggle press DIMENSIONAL DRAWINGS Board-on Connectors C Recommended Layout 3,21 1,27 0,153 0,45 0,3 1,2 0,8 1,6 12 12.77 14.70 26 21.66 23.59 20.67 11.78 50 36.
SMC - 1.27 mm Connectors BOARD-ON IDC Board-on Cable Guide 4,2 3,8 A 12 10,78 26 19,67 15,87 6,98 50 34,91 31,11 No. of contacts A B ORDERING INFORMATION No. of Pins Configuration Packaging Part Number 12 Connector Tape and reel 244628 12 Cable guide Poly bag 244631 26 Connector Tape and reel 244629 26 Cable guide Poly bag 244632 50 Connector Tape and reel 244630 50 Cable guide Poly bag 244633 Please order cable guide separately.
SMC - 1.27 mm Connectors CABLE ASSEMBLIES PRODUCT SPECIFICATION • cable assemblies with IDC female connectors • ribbon cable AWG 30/7 • three different cable types • assemblies with single wire or shielded wires are possible (on request) DIMENSIONAL DRAWINGS B 1,27 1,27 4,2 12 12.69 9.37 0,5 max. 16 15.23 11.91 L 13,9 A 20 17.77 14.45 26 21.58 18.26 32 25.39 22.07 40 32.53 27.15 50 38.88 33.50 68 50.31 44.93 80 57.93 52.55 No.
SMC - 1.27 mm Connectors CABLE ASSEMBLIES CONFIGURATIONS Standard Connector #1 Crossed Connector #2 Connector #2 a1 a1 A U A a1 U I D U X X a1 a1 A A A U I A D A D I N C a1 a1 A U a1 Catalog E 074473 09/14 Edition 8 www.erni.
SMC - 1.
SMC - 1.27 mm Connectors CABLE ASSEMBLIES ORDERIN INFORMATION STANDARD CABLE ASSEMBLIES IDCCS _ SMC _ 1.27 _ oo _ oo _ ooo _ ooooo _ oo Cable type PV: Standard (PVC) HT: High temperature (TPE-S) HF: Halogen-free (TPE-O) Length in mm Connector #2 e.g.: AUI or AUX Connector #1 e.g.: AU No. of Contacts 12, 16, 20, 26, 32, 40, 50, 68, 80 Example for a standard configuration: IDCCS_SMC_1.
SMC - 1.
SMC - 1.
SMC - 1.
ERNI Electronics GmbH & Co. KG Europe South America Africa Japan Seestrasse 9 73099 Adelberg Germany Tel +49 7166 50-0 Fax +49 7166 50-282 info@erni.com www.erni.com ERNI Electronics, Inc. North America Canada Mexico 2201 Westwood Ave Richmond, VA 23230/USA Tel +1 804 228-4100 Fax +1 804 228-4099 info@erni.us ERNI Asia Holding Pte Ltd. Asia Australia New Zealand Blk 4008 Ang Mo Kio Avenue 10 #04-01/02 Techplace I Singapore 569625 Tel +65 6 555 5885 Fax +65 6 555 5995 info@erni-asia.
