,27 mm Steckverbinder SMC www.erni.
www.erni.com 2 Catalog E 074560 Katalog 10/06 D 074474 12/08 Edition 1 Ausgabe www.erni.
1,27 mm Steckverbinder SMC Inhaltsverzeichnis Anwendungsbeispiele . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Technische Merkmale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Auf einen Blick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1,27 mm Steckverbinder SMC Anwendungsbeispiele Motherboard auf Tochterkarte für ISDN Anlagen Motherboard auf Tochterkarte für industrielle PLC´s Mezzanine Leiterplatten für Handy Testgeräte Mezzanine Leiterplatten für Automatisierungsindustrie Board-to-Cable für Video-Codiersysteme Vielseitige Anordnungen in einem industriellen Controller 2 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Technische Merkmale Board-to-Board und Board-to-Cable Anwendung Großer Fangbereich durch Einführungschrägen Polarisierung des Steckgesichts Koplanarität Polzahlen Rear I/O auf Backplanes Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Auf einen Blick Gestaltungsfreiheit beim Baugruppen-Design und Flexibilität in der Anwendung Verschiedene Bauformen ermöglichen dem Anwender die Freiheit für ein optimales Auswahlmöglichkeiten Baugruppen-Design. für moderne Baugruppen Applikationen Eine Leiterplatten-Lösung für alle Branchen. Variabler Leiterplattenabstand Flexibler Leiterplattenabstand von 8.0 mm bis 20.0 mm für Baugruppen-Lösungen.
1,27 mm Steckverbinder SMC Auf einen Blick Vollautomatische Fertigung der SMC-Steckverbinder Die Steckverbinder der SMC-Serie werden auf modernen automatischen Fertigungseinrichtungen prozessicher hergestellt. Prozesssicheres SMT-Löten Der hochtemperaturbeständige Thermoplast-Isolierkörper und die sehr exakte Koplanarität der Kontakte gestatten das prozesssichere SMT-Löten.
1,27 mm Steckverbinder SMC Steckbedingungen für SMC-Systeme Zulässiger Mittenversatz in Längs- und Querrichtung: ±0.7mm, 0,7 0,7 4° Zulässiger Winkelversatz längs: ±4˚, quer: ±2˚ 2° 2,5 8,0 -20,0 Überstecklänge max. 2,5 mm / Board-to-Board Abstand 8-20 mm Alle Maße in mm 6 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Steckmöglichkeiten Mezzanine Extender card Abgewinkelte Federleiste Messerleiste ( Steckhöhe X ) Right Angle Female 6,25 9,50 - 11,00 1,75 9,05 10,80 - 12,30 H* Y 3,25 9,05 12,30 - 13,80 4,85 9,05 13,90 - 15,40 15,40 - 16,90 1,75 13,65 3,25 13,65 16,90 - 18,40 4,85 13,65 18,50 - 20,00 15,8 3,25 min.
1,27 mm Steckverbinder SMC Überkopflöten Für industrielle Lösungen werden heutzutage die Leiterplatten fast immer beidseitig bestückt. Die Schaltungen sind oft sehr komplex und lassen sich leider nicht so realisieren, dass die großen Bauteile wie z. B. Steckverbinder sich ausschließlich auf einer Seite der Leiterplatte befinden. Somit wächst der Bedarf nach Bauteilen, die für das Überkopflöten geeignet sind.
1,27 mm Steckverbinder SMC ERNIPRESS® Technologie Bestellinformation Einpresswerkzeuge für Messerleisten Beschreibung Kommentar Oberes Pressteil Artikel-Nr. Unteres Pressteil Artikel-Nr.
1,27 mm Steckverbinder SMC Vorteile und Nutzen aus 20-jähriger Entwicklungshistorie Der ultra-zuverlässige, doppelschenklige Federkontakt, mit dem Kontaktpunkt auf der gewalzten, homogenen Oberfläche, garantiert die sichere Kontaktgabe auch in anspruchsvoller Umgebung. Überragende Haltekräfte der zusätzlichen Lötwinkel absorbieren mechanischen Stress und widerstehen hohen Schockund Vibrationsbelastungen. Sie sind Garant für eine robuste Lötverbindung.
1,27 mm Steckverbinder SMC Elektrische und mechanische Kennwerte Standard Polzahlen Technische Kennwerte Klimakategorie Lager- und Betriebstemperaturbereich Strombelastbarkeit pro Kontakt DIN EN 60068-1 test b IEC60512 test 5b Luft- und Kriechstrecke Betriebsspannung IEC 60664 Spannungsfestigkeit IEC 60512 test 4a IEC 60512 test 2a IEC 60512 test 3a IEC 60512 test 6d IEC 60512 test 2e IEC 60512 test 6c IEC 60512 test 2e IEC 60512 test 9a IEC 60512 test 13b Durchgangswiderstand Isolationwiderstand Sc
1,27 mm Steckverbinder SMC Elektrische und mechanische Kennwerte Standard Bauform B, Bauform Q und Kabelsystem Board-on IDC mit AWG30 Flachbandkabel 250 mm 12, 26, 50, 68, 80 12, 26, 50 3,5 s bei 350 °C 3,5 s bei 350 °C 10 s bei 260 °C 10 s bei 260 °C 20 - 40 s bei 260 °C 20 - 40 s bei 260 °C Das Löten von Einpress-Steckverbindern ist nicht empfehlenswert.
1,27 mm Steckverbinder SMC Elektrische und mechanische Kennwerte Standard Polzahlen Standardkabel (PVC) für Kabelsysteme 12, 26, 50, 68, 80 Kabelaufbau Querschnitt AWG30 / 7 / 0.06 mm2 Leiter Kennader Cu-Litze verzinnt rot DIN 57207/ VDE 0207 Isolierung PVC Shorehärte 94 ±3 (Shore A) Technische Kennwerte Betriebstemperatur -20/105°C Strombelastbarkeit 0,8 A bei 20°C Betriebsspannung max.
1,27 mm Steckverbinder SMC Abgewinkelte Messerleisten Bauform B Maßzeichnung Alle Maße in mm 14 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Abgewinkelte Messerleisten Bauform B Bestellinformation Ausführung Polzahl Anschlussart Verpackung Artikelnummer Bauform B 12 SMT Gurt/560 St. 054594 Bauform B 26 SMT Gurt/560 St. 054595 Bauform B 50 SMT Gurt/560 St. 054596 Bauform B 68 SMT Gurt/560 St. 114805 Bauform B 80 SMT Gurt/560 St. 114806 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Abgewinkelte Messerleisten Bauform B mit Verriegelungssystem Maßzeichnung Leiterplatten-Layout Vorschlag für SMT PCB-Layout Proposal for SMT 10,77 ±0,03 12,7 2,21 ±0,03 5 x 1,27 = 6,35 2,2 7,6 3,1 2 ±0,05 1,27 1,27 1,27 1,8 9,57 8,57 10,77 ±0,03 0,3 1,2 1,27 1,27 6,4 10,37 0,75 -0,05 10 8,8 7,2 4 ±0,1 5 2 b1 b6 1,6 -0,03 0,8 1,5 -0,03 5 x 1,27 = 6,35 4,2 Alle Maße in mm 16 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Abgewinkelte Messerleisten Bauform B mit Verriegelungssystem Bestellinformation Ausführung Polzahl Anschlussart Verpackung Artikelnummer Bauform B 12 SMT Gurt/560 St. 254273 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Gerade Messerleisten Bauform Q Maßzeichnung Steckverbinder mit Steckhöhe von 1,75 mm (ungesteckt) Alle Maße in mm 18 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Gerade Messerleisten Bauform Q Maßzeichnung Steckverbinder mit Steckhöhe von 3,25 mm (ungesteckt) Alle Maße in mm Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Gerade Messerleisten Bauform Q Bestellinformation Ausführung Polzahl Anschlussart Steckhöhe, ungesteckt Verpackung Artikelnummer Bauform Q 12 SMT 1.75 mm Gurt/280 St. 154818 Bauform Q 12 SMT 3.25 mm Gurt/280 St. 063179 Bauform Q 26 SMT 1.75 mm Gurt/280 St. 154819 Bauform Q 26 SMT 3.25 mm Gurt/280 St. 063209 Bauform Q 50 SMT 1.75 mm Gurt/280 St. 154820 Bauform Q 50 SMT 3.25 mm Gurt/280 St.
1,27 mm Steckverbinder SMC Gerade Messerleisten Bauform Q Bestellinformation Ausführung Polzahl Anschlussart Steckhöhe, ungesteckt Verpackung Artikelnummer Bauform Q 68 SMT 1.75 mm Gurt/280 St. 154821 Bauform Q 68 SMT 3.25 mm Gurt/280 St. 114807 Bauform Q 80 SMT 1.75 mm Gurt/280 St. 154822 Bauform Q 80 SMT 3.25 mm Gurt/280 St. 114808 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Gerade Einpress-Messerleisten Bauform Q Maßzeichnung D E Schichtaufba Metal plating A nx1.27= 1,27 1,27 1,27 Durchmesser des metallisierten Loc Diameter of finish plated-through ho 3,25 1,8 Lochbild für Leiterplatte Board hole pattern a1 a1 nx1.27= A 4,2 12 6.35 9.57 8.57 10.35 26 15.24 18.46 17.46 19.24 50 30.48 33.7 32.7 34.48 68 41.91 45.13 44.13 45.91 80 49.53 52.75 51.75 53.53 A D E F 5 0,1 4 8,2 2,8 1,27 F Polzahl No.
1,27 mm Steckverbinder SMC Gerade Einpress-Messerleisten Bauform Q Bestellinformation Ausführung Polzahl Anschlussart Steckhöhe, ungesteckt Verpackung Artikelnummer Bauform Q 12 Einpress 3.25 mm Stange/65 St. 064002 Bauform Q 26 Einpress 3.25 mm Stange/35 St. 064003 Bauform Q 50 Einpress 3.25 mm Stange/19 St. 064004 Bauform Q 68 Einpress 3.25 mm Stange/14 St. 144183 Bauform Q 80 Einpress 3.25 mm Stange/12 St. 144185 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Abgewinkelte Federleisten Bauform Q Maßzeichnung Alle Maße in mm 24 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Abgewinkelte Federleisten Bauform Q Bestellinformation Ausführung Polzahl Anschlussart Verpackung Artikelnummer Bauform Q 12 SMT Gurt/560 St. 154740 Bauform Q 26 SMT Gurt/560 St. 154741 Bauform Q 50 SMT Gurt/560 St. 154742 Bauform Q 68 SMT Gurt/560 St. 154743 Bauform Q 80 SMT Gurt/560 St. 154744 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Abgewinkelte Federleisten Bauform Q mit Verriegelungssystem b6 b6 b1 b1 2 0,75 -0,05 4,25 4,25 1,27 PCB-Layout Proposal for SMT 4,5 0,8 5 x 1,27 6,35 = 1,6 -0,03 1,27 9,37 2,2 5 x 1,27 6,35 = 7,6 4,5 9,37 Leiterplatten-Layout Vorschlag für SMT 1,27 1,27 2 ±0,05 3,05 3,05 1,55 0,75 -0,05 1,27 8,37 1,5 -0,03 1,55 8,37 1,5 -0,03 1,27 9,6 7,2 5,2 1,27 2 7,2 7,2 9,6 7,2 5,2 Maßzeichnung 1,27 2,21 ±0,03 5 x 1,27 6,35 = 10,77 ±0,03 Alle Maße in
1,27 mm Steckverbinder SMC Abgewinkelte Federleisten Bauform Q mit Verriegelungssystem Bestellinformation Ausführung Polzahl Anschlussart Verpackung Artikelnummer Bauform Q 12 SMT Gurt/560 St. 254262 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Gerade Federleisten Bauform B Maßzeichnung Steckverbinder mit einer Steckhöhe von 6,25 mm (ungesteckt) Alle Maße in mm 28 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Gerade Federleisten Bauform B Maßzeichnung Steckverbinder mit einer Steckhöhe von 9.05 mm (ungesteckt) Alle Maße in mm Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Gerade Federleisten Bauform B Maßzeichnung Steckverbinder mit einer Steckhöhe von 13,65 mm (ungesteckt) 17,76 4,2 13,65 13,95 5,2 Ansaughaube hood 0,75 -0,05 0,635 1,5 -0,03 34,9 ±0,03 36,8 32,5 a1 1,55 7,2 3,05 a25 1,27 1,27 24 x 1,27 = 30,48 33,5 Leiterplatten-Layout Vorschlag für SMT PCB-Layout Proposal for SMT 34,9 ±0,03 24 x 1,27 = 30,48 a1 7,6 0,3 0,8 1,2 1,6 -0,03 5,5 1,27 1,1 2,2 2,21 ±0,03 Alle Maße in mm 30 Katalog D 074474 12/08 Ausgabe
1,27 mm Steckverbinder SMC Gerade Federleisten Bauform B Bestellinformation Ausführung Polzahl Anschlussart Steckhöhe, ungesteckt Verpackung Artikelnummer Bauform B 12 SMT 6.25 mm Gurt/280 St. 154805 Bauform B 12 SMT 9.05 mm Gurt/280 St. 124043 Bauform B 26 SMT 6.25 mm Gurt/280 St. 154806 Bauform B 26 SMT 9.05 mm Gurt/280 St. 124044 Bauform B 50 SMT 6.25 mm Gurt/280 St. 154807 Bauform B 50 SMT 9.05 mm Gurt/280 St. 124045 Katalog D 074474 12/08 Ausgabe 7e www.
1,27 mm Steckverbinder SMC Gerade Federleisten Bauform B Bestellinformation Ausführung Polzahl Anschlussart Steckhöhe, ungesteckt Verpackung Artikelnummer Bauform B 50 SMT 13.65 mm Gurt/170 St. 234199 Bauform B 68 SMT 6.25 mm Gurt/280 St. 154808 Bauform B 68 SMT 9.05 mm Gurt/280 St. 114803 Bauform B 80 SMT 6.25 mm Gurt/280 St. 154809 Bauform B 80 SMT 9.05 mm Gurt/280 St. 114804 32 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Board-on IDC Maßzeichnung C Bestückungshilfe D mounting support 5 5 5,6 E 0,7 1,5 B n x 1.27 = A 12 4,2 2,15 7,2 b1 1,27 a1 6,35 12,77 14,7 11,785 8 11 26 15,24 21,66 50 30,48 36,9 23,59 20,675 8 20 38,83 35,915 8 35 Pohlzahl No.
1,27 mm Steckverbinder SMC Board-on IDC Maßzeichnung A 0,02 3,8 n x 0,635 = B 12 26 50 4,2 Pohlzahl No. of contacts 10,785 6,985 19,675 15,875 34,915 31,115 A B Alle Maße in mm 34 Katalog D 074474 12/08 Ausgabe 7e www.erni.
1,27 mm Connectors SMC Board-on IDC Bestellinformation Ausführung Polzahl Anschlussart Verpackung Artikelnummer Board-on IDC 12 SMT/IDC Gurt/280 St. 244628 Kabelführung für 12 poligen Board-on Steckverbinder – – Beutel/280 St. 244631 Board-on IDC 26 SMT/IDC Gurt/280 St. 244629 Kabelführung für 26 poligen Board-on Steckverbinder – – Beutel/280 St. 244632 Board-on IDC 50 SMT/IDC Gurt/280 St. 244630 Kabelführung für 50 poligen Board-on Steckverbinder – – Beutel/280 St.
1,27 mm Steckverbinder SMC Board-on IDC Verarbeitungsbedingungen Das ERNI SMC Board-on IDC System bietet Optimierungsmöglichkeiten bei Kabelverbindungen in zweierlei Hinsicht. Zum einen ist es äußerst kompakt und damit platzsparend und zudem noch preisgünstiger als eine herkömmliche Feder/Messer Steckverbindung. Das Kabel muss nur an einen bereits mit der Leiterplatte verlöteten Stecker angeschlagen werden.
1,27 mm Steckverbinder SMC Federleisten-Kabelsystem Maßzeichungen L (Length) red edge at b1 Female IDC Katalog D 074474 12/08 Female IDC Ausgabe 7e www.erni.
1,27 mm Steckverbinder SMC Federleisten-Kabelsystem Bestellinformation Polzahl Länge Kabelgröße Kabeltyp 12 100 mm AWG 30 PVC 173799 12 200 mm AWG 30 PVC 173800 12 300 mm AWG 30 PVC 173801 26 100 mm AWG 30 PVC 173796 26 200 mm AWG 30 PVC 173797 26 300 mm AWG 30 PVC 173798 50 100 mm AWG 30 PVC 173793 50 200 mm AWG 30 PVC 173794 50 300 mm AWG 30 PVC 173795 68 100 mm AWG 30 PVC 193888 68 200 mm AWG 30 PVC 193889 68 300 mm AWG 30 PVC 193890 80 10
1,27 mm Steckverbinder SMC Bestellnummernverzeichnis Artikelnummer Seite Artikelnummer Seite 054594 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 054595 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 054596 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 063179 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 063209 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1,27 mm Steckverbinder SMC Notizen 40 Katalog D 074474 12/08 Ausgabe 7e www.erni.
Member www.erni.
ERNI Electronics GmbH Seestrasse 9 73099 Adelberg, Deutschland Tel +49 7166 50-0 Fax +49 7166 50-282 info@erni.de Europa ERNI Electronics, Inc. 2201 Westwood Ave Richmond, VA 23230 Tel +1 804 228-4100 Fax +1 804 228-4099 info.usa@erni.com Nordamerika ERNI Asia Holding Pte Ltd. Blk 4008 Ang Mo Kio Avenue 10 #04-01/02 Techplace I Singapore 569625 Tel +65 6 555 5885 Fax +65 6 555 5995 info@erni-asia.com Asien Südamerika Kanada Afrika Japan Mexiko www.erni.