Datasheet

14 Catalog E 074473 09/14 Edition 8 www.erni.com
CHARACTERISTICS
Description Standard
PCB Connectors, Cable As-
semblies, B-to-B Adapter
Board-on IDC (Ribbon Cable
AWG 30, 250 mm)
Climate category
DIN EN 60068-1
test b
55 / 150 / 56 55 / 125 / 56
Temperature range
-55 / 125 °C (PCB Connectors)
-55 / 105 °C (Cable Assemblies)
-55 / 105 °C
Current rating per contact IEC60512 test 5b
12-pin version at 20 °C ambient temperature:
1.7 A (up to 2.7 A with optimized layout)
Air- and creepage distance contact - contact min. 0.4 mm
Operating voltage IEC 60664
The permissible operating voltages depend on the customer ap-
plication and on the applicable or specified safety requirements.
Insulation coordination according to IEC 60664-1 has to be re-
garded for the complete electrical device. Therefore, the maxi-
mum creepage and clearance distances of the mated connec-
tors are specified for consideration as a part of the whole current
path. In practice, reductions in creepage or clearance distances
may occur due to the conductive pattern of the printed board or
the wiring used, and have to be taken into account separately.
As a result the creepage and clearance distances for the applica-
tion may be reduced compared to those of the connector.
Dielectric strength IEC 60512 test 4a contact - contact 500 V
rms
Contact resistance IEC 60512 test 2a
< 25 mΩ
< 10 mΩ (cable assemblies)
< 10 mΩ
Insulation resistance IEC 60512 test 3a > 10
4
MΩ
Vibration, sine IEC 60512 test 6d
10 – 2000 Hz
20 g
Contact disturbance
(while vibration test)
IEC 60512 test 2e < 1 µs
Shock halfsine IEC 60512 test 6c
50 g
11 ms
Contact disturbance
(while shock test)
IEC 60512 test 2e < 1 µs
TECHNICAL DATA
SMC - 1.27 mm Connectors