Certifications 2

19/01/2018
EN (English)
3/8
Flexsol 903
SAFETY DATA SHEET
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
5.3. Advice for firefighters
Precautionary measures fire
:
Exposure to fire/heat: keep upwind. Exposure to fire/heat: consider evacuation. Exposure to
fire/heat: have neighbourhood close doors and windows.
Firefighting instructions
:
Dilute combustible/toxic gases/vapours with water spray.
Protection during firefighting
:
Heat resistant gloves. Heat/fire exposure: compressed air/oxygen apparatus.
Other information (fire fighting)
:
Massive metal and the oxides are not combustible.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures
:
Not applicable for solder wire.
6.1.1. For non-emergency personnel
No additional information available
6.1.2. For emergency responders
No additional information available
6.2. Environmental precautions
Prevent spreading in sewers.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up
:
If melted: allow liquid to solidify before taking it up.
Other information
:
Upon burning: formation of metallic fumes/vapours.
6.4. Reference to other sections
No additional information available
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed
:
Vapours produced during soldering operations.
Precautions for safe handling
:
Avoid breathing fume. Work under local exhaust/ventilation. Wash hands immediately after
handling the product.
Hygiene measures
:
Always wash hands and face immediately after handling this product, and once again before
leaving the workplace.
7.2. Conditions for safe storage, including any incompatibilities
Maximum storage period
:
Unlimited
Storage temperature
:
Store at ambient temperature
Storage area
:
Store at ambient temperature. Store in a dry area.
7.3. Specific end use(s)
REACH Disclaimer:
This information is based on current knowledge. Consistency of data in the SDS with CSR is considered, as far as the information is available at
the time of compilation (cfr Revision date and Version number).
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No additional information available
8.2. Exposure controls
Personal protective equipment
:
Safety glasses. Gloves. Heat resistant gloves if handling hot metal.
Hand protection
:
The selected protective gloves must meet the specifications of EU Directive 89/686/EEC and
EN 374, derived therefrom.
Eye protection
:
Chemical goggles or safety glasses.
Consumer exposure controls
:
The need for personal protective equipment should be based on a workplace risk assessment
for the particular use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:
Solid