HVAC/R & PLUMBING EQUIPMENT 2016 CATALOG esab.
® TURBOTORCH THE PROFESSIONALS CHOICE Since 1967, TurboTorch®, an ESAB® brand, has set the highest standard for manufacturers of air fuel equipment. TurboTorch is the original – the innovator of swirl technology and has the strongest brand recognition of any hand torch line. TurboTorch offers industry leading and NATE recognized training programs with the best customer support in the industry and a market leading warranty.
TABLE OF CONTENTS OXYFUEL SINGLE STAGE G150 G150 HIGH CAPACITY HIGH CAPACITY ACETYLENE OXYGEN ACETYLENE CUTTING BRAZING WELDING UP TO 3" SINGLE STAGE UP TO (76.2 mm) (6.35 mm) WITH OPTIONAL TIPS WITH OPTIONAL TIPS HEAT RANGE OXYFUEL Portable Tote Outfits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3 OxyFuel Outfits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OXYFUEL - PORTABLE TOTE OUTFITS OXYFUEL OXYFUEL PORTABLE TOTES - BRAZING, CUTTING & WELDING TurboTorch® portable tote outfits are manufactured by Victor®. These outfits are available in several configurations designed for a variety of oxyfuel brazing, cutting and welding applications. The new tote design features an ergonomic carrying handle, built-in storage case and a functional balanced design.
OXYFUEL PORTABLE TOTES - BRAZING, CUTTING & WELDING PLUS HEATING KEY APPLICATIONS HVAC Ergonomic Handle REFRIGERATION MAINTENANCE & REPAIR WARRANTY 5 YEAR ® VICTOR 100 SERIES Portable Tote Outfits 100-CP Part No. 0384-0943 100-CPT Part No. 0384-0944 Built-in Storage Compartments This series of outfits is designed for medium duty brazing, cutting, heating and welding jobs. Cuts up to 1/4" (6.4 mm) or 5" (127.0 mm) with optional tips. It welds up to 5/64" (2.0 mm) or 1" (25.
OXYFUEL - OUTFITS OXYFUEL OXYFUEL OUTFITS - BRAZING, CUTTING, HEATING & WELDING TurboTorch® outfits are manufactured by Victor®, the most recognized name in Gas Equipment. These outfits are available in several configurations designed for a variety of oxyfuel cutting, heating and welding applications. Victor’s commitment to quality and safety are built into all of the TurboTorch outfits. CUTTING UP TO WELDING 5" 5 (25.
UP TO 5" 5 UP TO (31.8 mm) (127 mm) WITH OPTIONAL TIPS WARRANTY WELDING CUTTING WITH OPTIONAL TIPS ® VICTOR MEDALIST 250 Medium Duty Cutting & Welding System Part No. 0384-2540 This medium duty outfit cuts up to 1/2" (12.7 mm) or 5" (127.0 mm) with optional tips. It welds up to 5/64" (2.0 mm) or 1.25" (31.8 mm) with optional nozzles.
OXYFUEL - COMPONENTS ® OXYFUEL VICTOR CUTTING ATTACHMENTS EFFICIENT DESIGN & CONSTRUCTION BRAZING CUTTING HEATING WELDING Victor cutting attachments and torch handles cover the full range of brazing, cutting, heating and welding needs. Performance matched cutting attachments are available for each torch handle series. Victor’s commitment to quality and safety are built into all of the TurboTorch products.
® VICTOR TORCH HANDLES - VALUE & OPERATOR SAFETY Control Valves with Stainless Steel Ball Stems have TEFLON® packing for smooth gas tight operation “Built-In” Flashback Arrestors no need for accessory flash arrestors Brass Head for strength and durability Patent # 5407348 Die-Forged Brass Body threaded for easier service Tube-Within-A-Tube designed for greater handle strength Heavy Ribbed Barrel Provides ventilation and sure grip “Built-In” Reverse Flow Check Valves for added operator safety (U.S.
OXYFUEL - COMPONENTS OXYFUEL BRAZING & MULTI-FLAME HEATING NOZZLES BRAZING HEATING Exclusive “Optimized” nozzles are designed for “optimum” performance in largest choice of types and sizes, plus uniformity of tip orifice and size for all series. TurboTorch® offers a complete range of nozzles, tips and elbows with a size for every application including: brazing, heating and welding.
SPECIAL APPLICATIONS NOZZLES Model Part No.
OXYFUEL - REGULATORS OXYGEN & ACETYLENE REGULATORS SINGLE STAGE SINGLE STAGE G150 HIGH CAPACITY HIGH CAPACITY OXYGEN ACETYLENE OXYFUEL G150 G150-540 Oxygen Regulator Part No. 0781-4241 Model Part No. G150-200 Acetylene Regulator Part No. 0781-4240 High Pressure Gauge P.S.I.G. KPA Low Pressure Gauge P.S.I.G. KPA Delivery Range Gauge Size P.S.I.G.
AIR ACETYLENE - OUTFITS ® TURBOTORCH TDLX SERIES TOTE OUTFITS Plumbing & HVAC Professionals can work in some rough conditions and need equipment that is built to withstand those everyday challenges. The TurboTorch TDLX 2010B Roller Tote outfit features durable wheels set to a wide wheel-base for added stability in rough terrain, as well as a metal base for a solid and reliable operation to easily move between work areas and keep the tools you need handy.
AIR ACETYLENE - TORCHES & KITS ® EXTREME SELF LIGHTING TORCH KITS BRAZING SOLDERING WARRANTY 3 Extreme Swirl Technology delivers high heat, super fast, reducing brazing time and fuel consumption. All air acetylene kits include gauge guards and cylinder wrench. Our best line of self-lighting torch kits are available in either valve rear or valve forward configurations. Improved design features quick-disconnect handles and replaceable tips and color coded “O” rings for quick gas identification.
® EXTREME SELF LIGHTING REPLACEMENT TIPS Increase the range of your torch kit with additional self lighting tips. All TurboTorch® tips feature an orifice screw that can be easily removed for simple cleaning or replacement, extending the life of the tip. With Color Coded “O” Rings Red for Acetylene AIR ACETYLENE PL-3A Replacement Tip Part No. 0386-0874 PL-5A Replacement Tip Part No. 0386-0818 PL-8A Replacement Tip Part No. 0386-0819 PL-12A Replacement Tip Part No.
AIR AIR ACETYLENE ACETYLENE -- TORCHES EXTREME& KITS STANDARD ® ® EXTREME STANDARD TORCH KITS BRAZING SOLDERING WARRANTY 3 This line of kits has been the industry standard for decades. Reliable and well engineered, the standard line of kits combines our Extreme Swirl Technology with a traditional manual lighting torch. All tips feature quick disconnect couplings and color coded O-rings for gas identification.
® EXTREME STANDARD REPLACEMENT TIPS A full series of manual lighting tips can be used with any Air Acetylene torch handle (PLF-A5 or G-4). Add range to your torch kit with economical tips that also feature a removable orifice screw. With Color Coded “O” Rings Red for Acetylene AIR ACETYLENE A-2 Replacement Tip Part No. 0386-0100 A-3 A-5 A-8 Replacement Tip Replacement Tip Replacement Tip Part No. 0386-0101 Part No. 0386-0102 Part No. 0386-0103 Combo Accessory Pro Pack Part No.
AIR ACETYLENE - TORCHES & KITS ™ SOF-FLAME TORCH KITS SOLDERING WARRANTY 3 For situations where Swirl Technology is too much, Sof-Flame torch kits offer proven durability and performance for plumbing applications in harsh environments. Tips have a threaded connection and feature a removable orifice screw. Use the Snappy Adapter (0386-0500) to connect “A” style tips. YEARS Tip AIR ACETYLENE Handle WSF-3 Torch Kit Part No.
™ SOF-FLAME REPLACEMENT TIPS Constructed of solid brass, Sof-Flame tips add flexibility to the standard kit, increasing the range up to 4 in. Fits WA-400 Torch Handles. Operating Pressure Range Acetylene Consumption Range Replacement Tip No. Part No. Soft Solders Replacement Orifice Model PSI BAR IN. M3 S-1 0386-1153 1/16" – 1/8" (1.6 – 3.2 mm) 5-15 0.35-1.0 0.53-0.89 0.0159-0.0267 OR-SI 0386-1049 S-2 0386-1154 1/8" – 3/8" (3.2 – 9.5 mm) 5-15 0.35-1.0 1.0-1.7 0.03-0.
® MAP-PRO & PROPANE - OUTFITS ® ® TURBOTORCH PROLINE SELF LIGHTING TORCH OUTFITS MAP-PRO & PROPANE TurboTorch knows the importance of providing durable and dependable products that stand the test of time. The PL-DLXPT torch outfit is loaded with pockets for your tools and to store all the accessories needed on the job. The Choice for Plumbing and HVAC Professionals.
® MAP-PRO & PROPANE - TORCHES & KITS ® EXTREME SELF LIGHTING TORCHES SOLDERING BRAZING HEATING TurboTorch® has developed a new series of hand torches that also feature Extreme Swirl Technology. The new Extreme series generates more heat than other hand torches for faster brazing times and less gas consumption. All Extreme series hand torches and tips feature TurboTorch swirl combustion. Higher heat levels, in a short amount of time, enable the pros to quickly complete the job.
® MAP-PRO & PROPANE - TORCHES & TIPS SOLDERING ® EXTREME STK, SK & TP TORCHES BRAZING MAP-PRO & PROPANE A longtime industry benchmark, the TurboTorch® line of STK torches now feature the new Extreme Swirl technology. All torches have 360 degree swivel tips and easy to clean orifice screws. Torch kits include the STK-R Pressure Regulator with CGA-600 connection and instruction manuals. STK-1 Extreme Torch Part No. 0386-0408 STK-9 Extreme Torch Part No. 0386-0403 STK-11 Extreme Torch Part No.
® EXTREME ME STK REPLACEME REPLACEMENT TIPS ST-1 Replacement Tip Part No. 0386-0170 ST-3 Replacement Tip Part No. 0386-0171 ST-4 Replacement Tip Part No. 0386-0183 ST-5 Replacement Tip Part No. 0386-0184 ST-11 Replacement Tip Part No. 0386-1282 ST-33 Replacement Tip Part No. 0386-0850 Tip No. Propane Self Lighting Tip MAP-Pro Part No. Soft Solders Silver Brazes Soft Solders Silver Brazes ST-1 0386-0170 1/8"–1/2" (3.2–13 mm) 1/8"–3/8" (3.2-9.5 mm) 1/8"–3/4" (3.
® MAP-PRO & PROPANE - TORCH KITS ™ PROLINE SELF LIGHTING TORCH KITS BRAZING SOLDERING WARRANTY 3 Featuring TurboTorch®’s Swirl Combustion technology, the Proline series kits are engineered for performance and durability. All kits are equipped with RL-P Regulators (CGA-510), allowing for the use of high heat/energy gases such as MAP-Pro or Propane. A full assortment of tips equipped with quick disconnects, expands the work range of the series.
® MAP-PRO & PROPANE - TIPS & ACCESSORIES ™ PROLINE SELF LIGHTING REPLACEMENT TIPS With Color Coded “O” Rings Blue for Propane PL-3T Replacement Tip Part No. 0386-0821 PL-4T Replacement Tip Part No. 0386-0822 PL-5T Replacement Tip Part No.
® MAP-PRO & PROPANE - KITS & TIPS SOLDERING MAP-PRO & PROPANE STANDARD KITS BRAZING WARRANTY 3 Designed with the same Swirl Combustion Technology that is featured in the Proline Self Lighting Series, the manual series offers an economical alternative for use with Propane and MAP-Pro gases. YEARS Quick Disconnect T-4 Tip Quick Disconnect H-4 Handle MAP-PRO & PROPANE Color Coded O-rings for Gas Identification LP-1 Total LP Kit Part No.
® MAP-PRO & PROPANE STANDARD REPLACEMENT TIPS With Color Coded “O” Rings Designed with the same Swirl Combustion Technology that is featured in the Proline Series, the manual series offers a variety of tip sizes helps complete the job quickly and economically. Replacement Tip No. Part No. T-3 Replacement Tip Part No. 0386-0151 Tip Size T-4 Replacement Tip Part No. 0386-0152 T-5 Replacement Tip Part No. 0386-0153 T-6 Replacement Tip Part No.
® MAP-PRO & PROPANE - ACCESSORIES MAP-PRO & PROPANE MAP-PRO & PROPANE TANKS & CYLINDERS PT-1 Propane Tank Part No. 0916-0004 MPT-1 MAP-Pro Tank Part No. 0916-0122 Propane replacement tank for use with all TurboTorch® hand torches Also use with TurboTorch #TT-LP Leak Detector Contains 14.1 oz Propane CGA 600 Connection Non-Refillable MAP-Pro Gas replacement tank for use with TurboTorch dual fuel hand torches Also use with TurboTorch #TT-LP Leak Detector Contains 14.
® MAP-PRO & PROPANE OPANE TANK & CYLINDER TOTES TT-MCR Dual Tank Tote Part No. 1421-0036 TT-B TT B Tank T Tote t Part No. 1421-0034 TT-MC Tank Tote Part No. 1421-0035 143-01 Cylinder Truck Part No. 1421-0039 Features: Features: Features: Heavy duty steel construction fits “MC” and “OX-20” (R) tank Storage for tips, hose, handle and cutting attachments Adapter needed for use with MPT-1 (not included) Heavy duty steel construction fits “B” tank Storage for tips, hose, handle and striker.
NITROGEN PURGE - KITS NITROGEN PURGE KITS Nitrogen purging: When brazing copper, it is imperative to purge with nitrogen in order to minimize or eliminate oxidation that results from heating the copper pipe. Without purging, oxidation will occur and the oxidized flakes that result can and will break off and flow through the system, damaging bearings and fouling system filters. All that is needed is a low pressure, low volume flow of nitrogen.
NITROGEN PURGE REGULATORS 245 SERIES Nitrogen Regulator Part No. 0386-0813 Part No. 0386-0814 250 SERIES Nitrogen Regulator Part No. 0386-0857 Part No. 0386-0875 H.P. Gauge Model Number L.P. Gauge Delivery Range Part No. DP250-800-580 (High Pressure) 0386-0857 P.S.I.G. KPA P.S.I.G. KPA P.S.I.G.
MULTI-PROCESS WELDING SYSTEMS ® ™ ESAB REBEL SERIES MULTI-PROCESS WELDING SYSTEMS MIG FLUX-CORED STICK WARRANTY TIG 3 YEARS The Rebel Series Welding Machines offer 120/230V flexibility and some of the most innovative welding technology available. A breakthrough design inspired by professional welders, Rebel is a complete package ready to weld anything – mild steel, aluminum, stainless steel – and go anywhere. SPECIFICATIONS Maximum Output 240 Amp 130A/20.
CHOOSE FROM 3 WELDING SYSTEMS: REBEL EMP 215ic REBEL EMS 215ic ™ Multi-Process MIG/Stick/TIG Welding System MIG/Stick Welding System Part No. 0558102240 System Includes: System Includes: All of the components in the Rebel EMP 215ic (0558102240) welding package with the exception of the Tweco TIG Torch and Accessories Part No. 0558102239 ESAB® Rebel Welding Power Source Tweco Fusion® 180 MIG Gun with 10 ft (3 m) Cable Spare MIG Gun parts kit, including bonus Contact Tips and Drive Rolls for .
MULTI-PROCESS WELDING SYSTEMS ® ® ESAB FABRICATOR SERIES MULTI-PROCESS WELDING SYSTEMS MIG FLUX-CORED STICK TIG WARRANTY 3 YEARS The ESAB Fabricator Series, with its 3-in-1 inverter technology, provides outstanding MIG, Stick and Lift TIG performance. You can tackle steel, stainless and aluminum projects with a single welding system. Even better, compact and lightweight Fabricator welders go wherever the work takes you.
The Fabricator® 252i is the most powerful of all the 3-in-1 machines -- with a maximum output of 300 Amps it can provide the performance you need. It has the power to run .045” Flux-Cored wire or MIG weld 1/2" steel in the spray transfer YEARS mode, an amazingly crisp short circuit MIG arc for sheet metal and can TIG weld down to 5 amps when precision counts. Dual gas connections on the back of the unit speed change-over when switching between processes that require different shielding gases.
PORTABLE AC/DC WELDING SYSTEMS ® ESAB AC/DC SERIES PORTABLE AC/DC HF TIG/STICK SYSTEMS HF TIG LIFT TIG STICK WARRANTY 3 YEARS The ESAB AC/DC Series, with its leading technology, has changed the game and set a new standard for portable welding equipment. Delivering HF TIG, Lift TIG, and Stick capability from one integrated portable system. They have been designed to provide users with total welding flexibility and optimized welding performance with each process.
® ESAB ET 186i AC/DC PORTABLE AC/DC HF TIG/STICK SYSTEMS HF TIG LIFT TIG STICK WARRANTY 3 YEARS All ESAB AC/DC portable power systems are multi-process, complete TIG and Stick welding solutions. High output duty cycle is ready to work with fully featured professional performance capability and preset controls for ease of use in DYI applications.
PORTABLE DC WELDING SYSTEMS ® LIFT TIG ESAB MINIARC 161LTS PORTABLE STICK/TIG DC WELDING SYSTEM STICK WARRANTY 3 YEARS Portable DC Welders are fully featured, easy to use machines, delivering higher output and duty cycles with professional performance. Stick and Lift TIG capabilities allow you to cover a wide range of maintenance and repair jobs, as well as light industrial fabrication applications. The MiniArc 161LTS is the welder’s choice for a Stick/TIG package.
® ESAB ES 95i - PORTABLE STICK/TIG DC WELDING SYSTEM LIFT TIG STICK WARRANTY 3 YEARS The 95i DC Stick and Stick/TIG welding systems are lightweight at only 4.4 kg (9.7 lbs) for portability, suitable for outdoor use, and comes complete with everything you need to start welding. Features: High 95 Amp Welding Output Excellent, Smooth and Stable Arc Performance Highly Efficient Inverter Design Ultra-Light for Maximum Portability (9.7 lbs - 4.
PORTABLE PLASMA - CUTTING SYSTEMS ® ® THERMAL DYNAMICS CUTMASTER 42 PORTABLE PLASMA CUTTING SYSTEM PAW WARRANTY 1 PLASMA YEAR The Cutmaster 42 is one of the most affordable, highest quality plasma systems on the market today. The Cutmaster TRUE Series offers lighter, more portable machines without compromising performance. As part of the TRUE Series, you can rely on the Cutmaster 42 to cut all day at its recommended cutting capacity and to pack more punch when you need it.
® AIRCUT 15C - PORTABLE PLASMA CUTTING SYSTEM TurboTorch® offers accessories to help improve cutting performance. Look for the TurboTorch mark on your plasma consumable parts for genuine TurboTorch consumables. This unit comes standard with a built-in internal air compressor that can be plugged in anywhere. Easy to use with superior cutting capacity. PAW WARRANTY 1 PLASMA YEAR Features: 25% more cutting power provides 25% faster cut speeds than the competition Lightweight only 29 lbs (13.
WELDING ACCESSORIES - ELECTRODES ® ESAB WELDING ELECTRODES You want a stick electrode you can trust. That’s just what you’ll find with ESAB’s electrodes. No matter the project, ESAB electrodes offer the ease of use, superior welding performance, tough mechanical properties, and consistent quality you need to get the job done. Each electrode is unique and when working with different materials (Steel, Stainless Steel, Cast Iron, etc.) they require different preparations.
WELDING ACCESSORIES - WIRE ® ESAB ER5356 ALUMINUM UM WIRE ESAB 5356 is a non-heat treatable solid aluminum wire for moderate high strength applications. Principle alloy elements include Magnesium, Manganese, Chromium and Titanium. CLASSIFICATION: AWS A5.10, ER5356 ER5356 Aluminum Wire Part No. 181508245A 181509243A 181516242A 181512242A 181512944A Spool SIze 14 lbs 16 lbs 20 lbs 20 lbs 311 lbs Wire Size .030" .
WELDING ACCESSORIES - WIRE ® ESAB CORESHIELD 40 FLUX CORED WIRE RE Coreshield 40 is a self-shielded flux cored wire primarily designed for multiple pass, horizontal and flat position welding of low and medium carbon steels when toughness is not a requirement. It’s designed to operate on DCEP (electrode positive) with longer electrical stickout. CLASSIFICATION: ASME SFA 5.36, AWS A5.36, E70T4-Z-CS3, ASME SFA 5.20, AWS A5.20, E70T-4 Coreshield 40 Multi-Pass Flux Cored Wire Part No.
WELDING ACCESSORIES - SOLDERING PRODUCTS ® ALL-STATE SOLDER FOR ALL METALS (NOT ALUMINUM) All-State 50/50 Paste Solder A 50/50 lead/tin solder for sealing, joining or tinning most common metals. Part No. 69070060 Size 1 lb Type Plastic Jar All-State Galvover Special low-temp alloy used to restore and protect galvanized area. Part No.
WELDING ACCESSORIES - HELMETS ® TWECO AUTO-DARKENING WELDING HELMETS The Tweco auto-darkening welding helmets provide enhanced performance with four arc sensors at an affordable price. They offer operator comfort due to their lightweight construction and versatility. With superior performance, durability and flexibility, Tweco helmets offer exceptional value in personal welding protection.
® ESAB AUTO-DARKENING WELDING HELMETS The ESAB auto-darkening welding helmets have been designed for the professional welder who wants the best in protection and performance. The light-weight shell and ergonomically designed headgear offers maximum comfort even when welding for long periods of time. Featuring the latest in digital lens technology, with internal LCD display, providing the welder full control to adjust shade level, sensitivity and delay settings with precision for any welding application.
WELDING ACCESSORIES WELDING ACCESSORIES - HOSES Durable and dependable, long-lasting and flexible, TurboTorch hoses offer exceptional value and proven performance. Hose Specifications 252-03P Oxy/Acetylene Twin Hose Part No. 0386-1094 Model Part No. Fitting Fuel 252-03P 0386-1094 12½ ft (3.8 m) Twin Hose Description “A” Oxy Acetylene AH-12 0386-1090 12 ft (3.6 m) Hose “A” Acetylene AH-24 0386-1091 24 ft (7.3 m) Hose “A” Acetylene H-12 1412-0080 12 ft (3.
WELDING ACCESSORIES - TOOLS Scratch Brush Specifications L-1 Single Flint Striker Part No. 1423-0061 Part No. 1423-0087 Description Carbon Steel Rows 3 x 19 1423-0082 Stainless Steel 3 x 19 Size 1.875" 1.875" Triple Flint Striker Part No. 0386-0297 F-1 Flint Refills For L- Single Flint Striker Part No. 1423-0024 Shoe Handle Brush Specifications Part No. 1423-0083 Description Carbon Steel Rows 4 x 16 1423-1442 Carbon Steel 4 x 16 Size 1.875" 1.
IN-STORE DISPLAYS ® TURBOTORCH IN-STORE DISPLAYS TurboTorch is the most demanded torch in the plumbing and HVAC market. Offering a full line of air fuel and oxy-fuel torches, equipment and accessories, our product is the first choice of professionals. Maximize your sales of these products by utilizing one of a variety of in-store marketing options.
Easily step up your TurboTorch Plumbing and HVAC products with the new Display Plan-O-Gram which includes recommended products and product placement on your existing structures, whether pegboard or slatwall. Additionally, TurboTorch offers optional overlay displays with attractive signage, as well as other point-of-sale material, to enhance the look of the storefront.
TurboTorch® is proud to offer our NATE Recognized Safety, Product and Application Training Course (#1737) Ask your Representative for details U.S. Customer Care: 800-426-1888 Form No. 56-1252 (6/2/16) Canada Customer Care: 905-827-4515 © 2016 The ESAB Group, Inc. International Customer Care: 940-381-1212 esab.com Printed in U.S.A.