Product Manual A

4 INSTALLATION
0463 709 101
- 16 -
© ESAB AB 2020
Recommended fuse sizes and minimum cable area for Rogue ES 180i PRO
Power cable for heavy-duty applications (SOOW type) must be used
Maximal current rating I
max
Stick (SMAW) 26A 25.7A
I1eff Stick (SMAW) 13A 13A
Fuse anti-surge type D MCB 20A 20A
Recommended fuse sizes and minimum cable area for Rogue ES 130i PRO, ES 180i
PRO
Power cable for heavy-duty applications (SOOW type) must be used
Supply voltage 230VAC 120VAC
Maximum recommended
extension cord length 328ft (100m) 328ft (100m)
Minimum recommended
extension cord size 12 AWG (3.3mm
2
) 12 AWG (3.3mm
2
)
NOTE!
Different variants of Rogue ES 130i PRO, ES 180i PRO are certified for different
outlet voltages. Always refer to the rating plate for the specification of the power
source in use.
NOTE!
Use the power source in accordance with the relevant national regulations.
For North America variants, the supplied adapter allows for connection of the power supply
input cable plug to 120V input power. Fitted plug is 20A/240V. Adapter is 15A/120V and
50A/240V.
Supply from power generators
The power source can be supplied from different types of generators. However, some
generators may not provide sufficient power for the welding power source to operate
correctly. Generators with Automatic Voltage Regulation (AVR) or with equivalent or better
type of regulation, with 7 kW rated power, are recommended.