User manual

-- 1 2 --
bi02d1aa
Voltage = 30 Volt
S Turn the knob to set the voltage until the display shows 30.0 Volt.
Wire feed speed = 393 In/min
S Turn the knob to set the wire feed speed until the display shows 393 In/min.
4SMAWELDING
4.1 Settings
Settings Setting range In steps of Default setting
Process GMA, SMA or
Arc air--guougin
-- MIG/MAG
“Hot start”* ON or OFF -- OFF
Hot start time 1--30 1 10
Arc force 0--10 0.5 3
Current
AristoMig 400
AristoMig 500
16 -- 400 A
16 -- 500 A
1A
1A
100 A
100 A
*) This function cannot be changed while welding is in progress.
SMA
SMA may also be referred to as welding with coated electrodes. Striking the arc melts
the electrode, and its coating forms protective slag.
Hot start
Hot start “Hot start” increases the weld current for an adjustable time at the start of
welding, thus reducing the risk of poor fusion at the beginning of the joint.
US