User Manual

Page:
6
User Manual:
REVERSING THE DOOR SWING
Tools Required: Phillips head screwdriver, at blade screwdriver and Hexagonal spanner.
→ Start by ensuring the refrigerator is unplugged and empty.
1. Remove the right top hinge cover.
2. Remove the screws xed the top-hinge with cross-slot screwdriver.
3. Remove the hinge shaft sleeve and the door block to the other side.
→ A. Remove the nut with sleeve. Take o the washer then remove the axes to
the other side and xed.
4. Disassemble the screws xed the bottom hinge assembly with cross slot screwdriver and
remove the adjustable foot.
→ Note. The refrigerator incline angle less 45°.
5. Replace the bottom hinge to the other side then x it with screws.
6. Install the two screws on the right and Remove the left top hinge cover.
7. Install the left top hinge cover on the right and Remove the two screws
8. Install the top-hinge. set the top door right position, x the top-hinge and the cover.
9. Install the left top hinge cover on the left
1
5
7 9
32
6
8
3A 4