User Guide

For Customer Service Call 1-866-556-2759

6. Find a clean, level place to begin the assembly of your soccer table. We

recommend building the table on the box top to protect the parts during

assembly.

7. Place one side panel P1 UPSIDE DOWN with the finished side facing out

as shown in FIGURE 2. The ball entry hole will be closest to the floor.

8. Slide one rod washer H10 and one rod bushing H11 onto each end of the

rod as shown in FIGURE 2. Align the rods as shown in FIGURE 2. Please

note the location of the hole that is near one end of each rod. This is the

handle end of the rod. There will be four handles on each side of the table.

It is critical that you set the rods as shown below so the table will be correct

when flipped over.

Figure 2