Service manual

B
A C D E F G SERVICE
26
E10 Log Fuel Bed Installation
Note: There are several types of fuel bed for the DL850 and DL1100. Please check which
fuel bed you have been supplied with and follow the installation instructions for that fuel
bed carefully.
Starting at the right hand side, place the ‘v’ shaped log in place, using the pins on the rear
burner to line up with the holes in the base of the log. Ensure the port pattern follows the
log shape:
Place the other logs using the same method as above, using the diagrams below to
ensure correct log placement
DL850
DL1100
Pour the supplied ‘embers’ into all the visible gaps around the front of the logs, being
careful to avoid letting any fall down between the pilot head, spark electrode and pilot
guard. If possible keep the area where the pilot hood ame is directed at the burner ports
clear.