Service manual

B
A C D E F G SERVICE
32
F2 Fitting the Velo Four Sided Fascia Panels
Step 1: Ensure the glass and all glass retain-
ers are securely tted. Note: If the glass gasket
requires a replacement, call your nearest Escea
agent who will ensure the part is replaced with
the correct type. In the event that the glass is
broken by impact, purchase the replacement
from an authorised Escea agent only.
Step 2: Attach the Velo Outer Fascia Bracket to
the top lid as shown below:
Step 3: Fit the Velo Outer Fascia brackets to the
bottom left and right sides of the appliance as
shown.
STEP 8
STEP 8