User guide

4. Keylock

Should you wish to keep the re from being tampered with by children or to discour-

age people from altering the temperature you can engage a keylock function which

stops the remote buttons from changing any settings. To engage the keylock simply

press the “Flame Eect” and “Fan Boost” buttons (3 + 7) simultaneously until the main

temperature digits display “LO”.

To disengage the keylock again press and hold the “Flame Eect” and “Fan Boost” but-

tons (3 + 7) simultaneously until the main temperature digits display “UL” and normal

access to the remote functions will be available.

NOTE: The “power” button (2) will still be able to turn the re o. But once turned o no

functions will be available until the keylock has been removed.

5. Timer Operation

Timers are a great way of starting the re when you are not around to turn it on. The timers can be set so

you can wake up or come home to a warm environment.

After pressing the TIMER SELECT button (5) the TIMER SET indicator and the hour gure on the clock will

start ashing. On the bottom right of the display you will also see the word “ON” and the number “1”. This

indicates that you are currently editing the hour that the re will turn “ON” for timer “1”. Pressing the PLUS

(8) or MINUS (4) button will change the hour.

Pressing the TIMER SELECT button (5) again will make the minute gures start ashing. You will continue

to see the “ON” and the number “1”. This indicates that you are currently editing the minute that the re

will turn “ON” for timer “1”. Pressing the PLUS (8) or MINUS (4) button will change the minute.

Pressing the TIMER SELECT button (5) again will make the hour gure start ashing once again. Though

now you will see the “OFF” indicator as well as the number “1”. This indicates that you are currently edit-

ing the hour that the re will now turn “OFF” for timer “1”. Pressing the PLUS (8) or MINUS (4) button will

change the hour.

Again pressing the TIMER SELECT button (5) will start the minutes ashing for you to nish editing the

“OFF” time for timer 1.

Pressing the TIMER SELECT button (5) will begin the cycle all over again for timer “2”.

Note: If you do not wish to set timer ‘2’, using the plus or minus keys, navigate to ‘0:FF’ which you will nd be-

tween ‘11:00’ and ‘0:00’. Press ‘Timer Select’ (5) again to exit.

− Activate Timer

This option allows you to activate your selected times. Pressing once will activate ‘Timer 1’. Pressing twice

will activate ‘Timer 2’ and by pressing again you will activate them both.

− De-activate Timer

To de-activate the timer, press “Activate Timer” (9) until “TIMER SET” no longer shows on the screen (this

will require between 1 to 3 pushes)

SETTI ME