User guide
9. Fascia, Log and Glass care
The Fascia is the visible surround of your Escea Gas Fireplace and must be treated carefully to prevent
unsightly marks from tarnishing the visual quality of the product. Some marking over time is inevitable
however, so the following directions will assist you in getting the maximum enjoyment from your Escea
Gas Fireplace.
NEVER, EVER RUB THE FASCIA.
The outside of an Escea Fascia must only be cleaned with a soft microbre cloth. If heavier cleaning is re-
quired for the likes of grease or stubborn ngerprint removal we recommend the use of Steel Kleen brand
Ezi Wipes. These wipes have been tested by Escea technicians and produce very satisfying results, when
used correctly. Instructions for their use follow.
For Powder Coated Fascias:
1. Ensure that the Gas Fireplace is o, and that the fascia is cold to the touch.
2. Using the gloves provided with your fascia, remove the towelette from the sachet and wipe the
fascia with even, straight strokes.
3. Because the wipe leaves a protective lm over the fascia, the entire fascia will need to be wiped
to avoid seeing a dierence in surface texture. Ensure this lm is distributed evenly.
4. If the lm is applied too heavily and is quite visible, you can remove the excess by gently wiping
dry with a microbre cloth
5. Ensure that no lm is applied to the glass of your Escea Gas Fireplace. If applied accidentally,
wipe o with an absorbent microbre cloth.