User manual

ManualsBrandsEscene ManualsComputer equipmentSayHi CC800

www.escene.cn/en/

Escene Communication

CC800

CC800 CC800

CC800 IP P

IP PIP P

IP Phone

honehone

hone

User Manual

User ManualUser Manual

User Manual

(firmware :V1.0.7.4)

Summary of content (83 pages)

PAGE 1
CC800 IP Phone Phone User Manual (firmware :V1.0.7.4) Escene Communication Co.Ltd www.escene.
PAGE 2
Tables of Contents 1.Getting Started ............................................................................................................................... 4 About......................................................................................................................................... 4 Feature Highlights:.................................................................................................................... 4 Technical Features.........................................
PAGE 3
LDAP .............................................................................................................................. 39 BanList ............................................................................................................................ 40 Enterprise Phonebook ..................................................................................................... 41 Advance ........................................................................................................
PAGE 4
1.Getting Started About CC800 is a small-screen-based IP phone in SayHi IP phone series, it has fashion and technological appearance, excellent voice quality, and powerful features, and it is a new generation of intelligent phones to replace of the traditional desktop office terminals, It accomplished the powerful telephony features by cooperating with the communications platform,. such as the call transfer, hotline, speed dial, voice mail, Do Not Disturb, etc.
PAGE 5
Network 2×RJ45 10/100M Ethernet Interfaces (LAN/PC) IP Assignment: static IP, DHCP, PPPoE PC port support Bridge and Router DNS SRV,STUN, VPN(L2TP), VLAN/QoS STUN,DTMF(In-band/RFC2833/SIP INFO) DC 5V Power Port, USB Power Port RJ9 Call Center Headset Port, 3.
PAGE 6
Specification Storage Temperature: 0 ℃-60℃ Operating Humidity: 10%-90% Size 254mm*205mm*87mm Certificate 、、、、、、、、 CE FCC RoHS Avaya Broadsoft Alcatel Yeastar Digium Metaswitch etc. Note: “*” Sign means function has not been published yet. www.escene.cn/en/ Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 7
2.Connecting Your Phone Your system administrator will likely connect your new SayHi CC800 IP Phone to the corporate IP telephony network. If that is not the case, refer to the graphic and table below to connect your phone. 1) Open the box CC800 IP Phone; carefully check the packing list, Packing List as follows: Item Counts IP Phone 1 Power adapter 1 RJ45 cable 1 Quick Installation 1 Product certification 1 ； 2) As shown in figure 2.1 and figure 2.
PAGE 8
Figure 2.3 Right side of CC800 www.escene.cn/en/ Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 9
3.Phone overview Understanding Buttons and Hardware From figure 3.1 to figure 3.2, you can understand buttons and hardware about SayHi CC800 Figure 3.1 Buttons and Hardware of SayHi CC800 Num Buttons & HD Description 1 LCD 128*64 Pixel LCD. 2 Soft key Operating function with what is the LCD show. 3 Line keys Select the phone line Call or Answer) （； Different colors for different status: 1) Red, flashing: There is an incoming call. 2) Red, steady: Pick up and enter normal call.
PAGE 10
6 RD/MUTE RD: Redial a call. Mute button: Toggles the Mute feature on or off. Red means the feature is enabled. 7 Headset Headset button: Toggles the headset on or off. Red means the feature is enabled.
PAGE 11
4 Line status Show the phone line status: 1) : Disconnect into network. 2) : Only Peer-to-Peer call. 3) : Network connected normal, but the line is not successfully registered. 5 Soft key labels 4) : Network is OK and the line is available. 5) : Line is turned on DND. Each displays a softkey function (displayed on your phone screen), and the function is different when menu changes. 4.Basic Call Handling You can perform basic call-handling tasks using a range of features and services.
PAGE 12
network setting ； --1) Choose “Menu” > “System setting” > “Advanced setting” --2) Enter the password required （The default is empty) ； --3) Choose “Network”, you can configure the following parameters: -Type: static IP or DHCP -IP: enter IP address , Note: Do not duplicate the IP address with other devices on the network -Mask: enter appropriate subnet mask -GW: enter appropriate gateway - DNS1: enter IP address of the primary DNS server - DNS2: enter IP address of the secondary DNS server -Web port
PAGE 13
--1) Press MENU or OK button > “Call history”, you can select Dial from a call log “Missed calls”, “Received calls” and “Dialed numbers”, - or press Navigation button (in Standby interface) > select “Missed calls” (down), “Received calls” (left) and “Dialed numbers” ； (right) ) --2) Then press Enter button follow the tips and press Dial.
PAGE 14
If you want to... Hang up while using the Handset Hang up while using the Speakerphone Then...
PAGE 15
Transferring Calls Transfer redirects a connected call. The target is the number to which you want to transfer the call. If you want to... Then...
PAGE 16
If you want to... Then... Enable DND on a Press MENU or OK button > “Function setting” > “DND” > (select single line line) “Enable”, e.g. --Line DND enabled, press twice DND, Disable DND -or press MENU or OK button > “Function setting” > “DND” >(select line) “Disable” 3-way Conference You can establish a three-party conference, during the conversation three phone parties can communicate with each other. If you want to... Invite the recipient Then...
PAGE 17
VOIP Call Forwarding If you want to... Unconditional transfer Then... --1) Press MENU or OK button > “Function setting” > “voip call forwarding”; --2)select “unconditional transfer”, select enable. --3)input number which you want to transfer, when have a call in ,it will unconditional transfer. Busy transfer --1) Press MENU or OK button > “Function setting” > “voip call forwarding”; --2)select “busy transfer”, select enable.
PAGE 18
5.Advanced Call Handling Speed Dialing Speed dialing allows you to enter an index number, press a button, or select a phone screen item to place a call. If you want to...
PAGE 19
Add Contacts --1) Press MENU button > “Phone book”, --2) Press Opt. [Tips: opt. means modify.] --3) Select “Add contact”, press ENTER --4) Use the navigation keys to select content, press opt. button to modify: -Name: set the name of contact, -NO.1-5: you can set up 5 contacts’ numbers, -Group: the contacts be divided into different user’s groups --5) Press Save soft key to complete Add group --1) Press MENU button > “Phone book” --2) Press Opt. [Tips: opt. means modify.
PAGE 20
View/Edit Contacts --1) Press MENU button > “Phone book”, --2) Select “View ALL”, -or select a contact who are belong to different group; --3) Select the contact, press the ENTER button or Opt. (to edit the contact’s information) --1) Press MENU button > “Phone book” LDAP --2) Select “LDAP”, press the ENTER button. “ --3) Select Search name->name”, then input the name ,and press OK or Del. --4)Select “Search number->Number”, then input the number ,and press OK or Del.
PAGE 21
Using Call Logs Your phone maintains records of your missed, placed, and received calls. If you want to… Then… View your call logs --1) Press MENU button > “Call history” > “Missed Calls”, “Received Calls”, or “Dialed numbers” --2) Use the navigation keys to view the call record information. Dial from a call log Please refer to the previous part 4.Basic call handing – Placing a call.
PAGE 22
If you want to… Open this function Then… --1) Press MENU button > “Function Setting” > “Fuzzy Search” --2) Press ENTER and make it Enable. Time & Date If you want to... Then... --1) Press MENU or OK button > “Function setting” > “time & Time & Date date”, --2)you can select : SNTP: select “enable ”to set parameter: time 、server 、daylight SIP server: select “enable ” to set parameter: root can modify date . manual Settings: select “enable ”to set parameter: date and time www.escene.
PAGE 23
6. Keypad Instruction SayHi series IP phones are can be configured in two ways. The first you can use the phone keypad where you can settings for you IP phones, the other you can log in to User Options web pages where you can settings for you IP phones. Use phone keypad to setting. Press MENU button to the main menu, Use the navigation keys to select menu, press ENTER button to confirm menu selections, press BACK button or DEL to delete input information.
PAGE 24
Create an SIP account ； --1) Choose “Menu” > “System setting” > “Advanced setting” （The default is empty) ； --3) Choose “SIP” > “Account sip”； --2) Enter the password required --4) Choose one of the account you want to setting, you can configure the following parameters -Enable account*: choose Enable -Display Name: The name displayed on the screen -User Name*: the account matched with the SIP server. （extension number) , -Authen usr: the Authenticated users matched with the SIP server.
PAGE 25
Load default settings If you want to... Then... Load default settings --1) Choose “Menu” > “System settings” > ； “Advanced settings” （ --2) Enter the password required The default is empty) ； --3) Choose “load default settings” and press ’OK’, then “Reboot” the phone. Customizing Rings and Volume If you want to… Then… Change the ring --1) Choose “Menu” > “System setting” > “Phone setting” > “Ring type” tone --2) Press navigation to choose ring tone, it will auto play the voice.
PAGE 26
detail information of the phone. Also you can press INFO button under the LCD, it can quickly into the summary [Software version\IP\Mask\MAC\Network type\Kernel version\Phone Mode] If you want to ...... Then......
PAGE 27
CC800 IPPhone 7.Web Settings We can configure IP Phone more handy through web setting. Press OK button on the keypad of the phone to enter the status page and find out the IP address of IP phone. Enter it (for example http://192.168.0.200) into the address bar of web browser. The default login name and password are both “root”. Config Guide You can finish the base configuration step-by-step by this guide.
PAGE 28
CC800 IPPhone After config the network parameter , press next, then you can config sip account for the phone. Press Finish, the base configuration of the phone is complete, now you can use the phone to call with sip. www.escene.cn/en/ 28 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 29
CC800 IPPhone Network You can config the network parameters for the phone on the web page. www.escene.cn/en/ 29 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 30
CC800 IPPhone Choose network, you will find the following parameters: Field IP Setting DHCP Hostname(Option12) Hostname(Option60) Static IP IP Address Netmask Gateway PPPoE Username (pppoe) Password (pppoe) MTU (pppoe) DNS Setting Automatic Description Config the phone get ip info from DHCP server Set the hostname with the option. Set the hostname with the option. Set the IP want you want to set.
PAGE 31
CC800 IPPhone Manual DNS Setting the DNS want you want to set. Primary DNS The primary DNS server Secondary The secondary DNS server MAC Address MAC Address Display the MAC of the phone Port Management Setting HTTP Port The default web port is 80,if you change it(for example change it to88), You must use IP and Web port to login the web page(for example http://192.168.0.200:88). It will take effect on next reboot.
PAGE 32
CC800 IPPhone SIP Account The phone attempts to register to the SIP server using the account/registrar data provided by the automatic or manual initialization www.escene.cn/en/ 32 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 33
CC800 IPPhone Choose one Account, you will find the following parameters: Field Description SIP Setting Enable You can choose on/off to enable/disable the line. Account Mode You can choose VOIP/PSTN, but this model un-support PSTN, If you want to, Pls contact us or buy another model.
PAGE 34
CC800 IPPhone STUN Server Session traversal utilities for NAT. BLA Share with the line. BLA Number BLA Number Call Method This method include SIP and TEL. Subscribe Period Subscribe expire time. Register Expire Time IP phone automatically registered every time DNS-SRV Enable/Disable DNS-SRV.
PAGE 35
CC800 IPPhone Function Keys: If you do not like the default setting with the function keys feature. You can change it options to what you like or normal use. NOTE: IF THE PHONE WITHOUT THE KEY, YOU DO NOT NEED TO SET THE KEY. Soft Keys: Soft keys is the key with below display in the LCD. You can change it for your mind to the other features in many all kinds of status. www.escene.cn/en/ 35 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 36
CC800 IPPhone Audio The IP phone supports the following voice codecs: G.722, G.711A, G.711U, G.723, and G.729A. You can enable/disable the desired codecs via Web interface. Please contact your system administrator for more details about the codecs. To enable/disable the codecs: 1) Choose Audio-> Audio Codecs www.escene.cn/en/ 36 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 37
CC800 IPPhone 2) Use the navigation keys to highlight the desired one in the Enabled/Disable Codecs list, and press the / to move to the other list. 3) Choose Submit to save the change. Of course, you can control the voice bulk in this choose. Phone Book Group You can add, edit and delete group in a phone book on web page of CC800. www.escene.cn/en/ 37 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 38
CC800 IPPhone 1) Click “PhoneBook” > “Group”, If you want to add a Group, you just ought to click ‘Add Group’ . You can edit an existed Group by click . You can delete an existed Group by click , if you want to delete all Groups, you just ought to click ’Delete All Group’.
PAGE 39
CC800 IPPhone Mobile Number The Number1 phone number of a contact Office Number The Number2 phone number of a contact OtherNumber The Number3 phone number of a contact Group You can assign a contact to a specific group. If there isn’t any group set on the phone, the group is None by default. Account Select a SIP account relating this contact, that is you can dial to the contact from this SIP account. LDAP 1).
PAGE 40
CC800 IPPhone BanList You can add, edit and delete banlist in a phone book on web page of CC800. 1) Click “Phone Book” > “BanList”, If you want to add a BanList, you just ought to click ‘Add BanList’. You can edit an existed BanList by click . You can delete an existed BanList by click , if you want to delete all BanLists, you just ought www.escene.cn/en/ 40 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 41
CC800 IPPhone to click ’Delete All BanList’.
PAGE 42
CC800 IPPhone www.escene.cn/en/ 42 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 43
CC800 IPPhone When used Phone Setting option, you can set several parameters as follow: Phone Setting Basic Called No Answer Time When it has coming call and enable this feature, the caller will be request time out in the stipulated time. DTMF The DTMF transmitted mode, include RFC2833,Inband,SIP Info, Auto Pound Send Method When you to use the code looks like #28#123 or %23123, you need to setting this feature.
PAGE 44
CC800 IPPhone Key Board Lock Lock with the phone LCD, when you enable the right password, it will auto disable this feature. if you want to use again, you need to open it again in the web management. Tips: the password is the same with the phone LCD. Default is empty. The Menu key can open it. [Menu Key]: only lock the Menu function, others can normal work. [Function Keys]: include Menu/Redial/Transfer/Hold etc. you just can use the number keys and speaker key. [All keys]: as the name implies.
PAGE 45
CC800 IPPhone Flash hook time The time with the flash hook. VOIP Call Forward All ways All ways transfer the call to others. If busy If the phone was busy working, the call will be transfer to others. If No Answer If the phone was no answer, the call will be transfer to others. Ring Frequency The ring frequency with the VOIP Call Forward.
PAGE 46
CC800 IPPhone When used VLAN Setting option,you can set several parameters as follow: VLAN Setting Enable VLAN You can enable/disable vlan for phone and pc VID [LAN/PC Port] The vlan you want the phone or pc to join VPN Setting If you need to setup a VPN Setting, you should fill below options. When used VPN Setting option, you can set several parameters as follow: VLAN Setting Enable VPN You can enable/disable VPN for phone and pc VPN Type: There is one choose you can choice.
PAGE 47
CC800 IPPhone Click "add rule" to entry this interface. Dial Plan Setting ID Dial Plan ID IP The ip of a phone which you want to call prefix The number which you need to press actually if you want to call the phone Called Number Insert There have two option, Enable or Disable. Position Which position you want insert the number Number Waht number you want to insert Called Number Delete There have two option, Enable or Disable.
PAGE 48
CC800 IPPhone You can use IP Strategy feature to make a list which line you want to allow make a call for your. e.g. As following picture you can see it has 192.168.0.248 in the list. When you open this feature. It means you just allow come from this IP address meeting Global SIP You also can setup the SIP server on Global SIP. Password Phone Maintenance Log If you need to catch a debuging Level, you need setup on this interface. www.escene.cn/en/ 48 Escene Communication www.InternetVoipPhone.co.
PAGE 49
CC800 IPPhone You can change the password used to login phone GUI in Password option.
PAGE 50
CC800 IPPhone Press the ‘Reset to Factory Setting’ option,the phone will load to factory default setting on next reboot. Auto Provision when you open the auto provision function, the phone will auto provision if the phone detect a higher software or kernel which are put on the software server .the detail information about auto provision you can see the appendix. www.escene.cn/en/ 50 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 51
CC800 IPPhone When use auto provision, you can set several parameters as follow: Auto Provision Auto Provision You can enable/disable auto provision by select on/off Protocol The protocol use for auto provision, it include tftp/http/ftp Software Server URL The server address of the auto provision Username The username provide by provision server Password The password provide by provision server Auto Download Software This used to auto download software from server Auto Download Kernel This use
PAGE 52
CC800 IPPhone Auto Download Expansion Expansion must the phone support this feature. You can make sure or not the phone model is it support with "P", eg.
PAGE 53
CC800 IPPhone Filename The name of the file want to download from ftp server Username The username provide by ftp server Password The password provide by ftp server Software Upgrade Used to upgrade the software of the phone Kernel Upgrade Used to upgrade the kernel of the phone Configuration You can used update/backup to update/backup the configure file of the phone Phone Book You can used update/backup to update/backup the phonebook of the phone *EXT Module You can used update/backup to upd
PAGE 54
CC800 IPPhone *EXT Module You can used update/backup to update/backup the expansion of the phone Tips: * means not support this model. HTTP Upgrade You can upgrade the software, kernel and configure file for the phone use http.
PAGE 55
CC800 IPPhone You can use reboot option to reboot the phone. When you press ‘Reboot’, the phone will reboot. Phone Status You can see the currently status of the phone when use Phone Status option. www.escene.cn/en/ 55 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 56
CC800 IPPhone System info About You can see the phone model when used About option. Attention: On this interface ,you can see the software and kernel which we used for test and this user_manual is written base on this software and kernel. This Software Version is v1.0.5.4-2523 This Kernel Version is v2.6.3 This Hardware Version is v2.x.x www.escene.cn/en/ 56 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 57
CC800 IPPhone Appendix：： Auto Provision Pre-configuration on TFTP/HTTP/HTTPS/FTP Server When the software or kernel auto-provision is enabled and want to run, IP Phone will check the software and kernel version at first, so we need make some pre-configuration on the provisioning server. Auto Provision for Software: 1. Create a notepad file named“FD000X00.cfg”(the “X” is decided by the model of the IP phone you are using, for example, the file name is “FD000800.cfg”); 2. Open the notepad file “FD000X00.
PAGE 58
CC800 IPPhone auto-provision: 1. Normal Configuration file: Normal Configuration file is the configuration file of your Escene IP phone. You can download it from your phone (You can see the following chapter to see how to download a configuration file from Escene IP hone) and modify by yourself. If the IP phone’s MAC address is 00:11:22:33:44:55, the normal configuration file of it should be 001122334455.xml. 2.
PAGE 59
CC800 IPPhone Phonebook on TFTP/HTTP/HTTPS/FTP Server Escene IP phone supports Enterprise Phonebook and Personal Phonebook. Enterprise Phonebook: Enterprise Phonebook is used for all staffs in your office. All phones will download a common phonebook for all staffs. The file’s name must be Enterprise_Phonebook.xml on your provisioning server and you cannot rename it. Personal Phonebook: Personal Phonebook is individual for each IP phone.
PAGE 60
CC800 IPPhone 5. Click “Submit” to save it. Auto-Provision via fixable TFTP/HTTP/HTTPS/FTP Server IP Phone: 1. Input the IP Phone’s IP Address in browser; 2. Enter user and password with “root” then open the web page; 3. Click “Phone Maintenance” and select “Auto Provision”; 4. select like as follows: www.escene.cn/en/ 60 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 61
CC800 IPPhone It supports three protocols in Auto-Provision: TFTP, HTTP and FTP. The format with provisioning server URL is: TFTP: TFTP://192.168.0.201 (192.168.0.201 is the default Server IP address) HTTP: HTTP://192.168.0.201 HTTPS: HTTPS://192.168.0.201 FTP: FTP://192.168.0.201 Username: the user to login FTP/HTTP/HTTPS server Password: the password of the user using to login FTP/HTTP/HTTPS server *Username and password are available in FTP/HTTP/HTTPS only (unavailable in TFTP). www.escene.
PAGE 62
CC800 IPPhone Auto Download Software: Download software from server and upgrade it automatically. Auto Download Kernel: Download kernel from server and upgrade it automatically. Auto Download Config File: Download configuration file from server and update it automatically. Broadsoft Compatibility: If you select this function, you need to put two configuration files (with Broadsoft format) on the provisioning server.
PAGE 63
CC800 IPPhone file, Expansion file, Enterprise/Personal Phonebook etc. You just need to enable the AES Encryption function and input the AES Key matching the one on your server on. 1. Overview LDAP stands for Lightweight Directory Access Protocol which is a client-server protocol for accessing a directory service.
PAGE 64
CC800 IPPhone We introduce each parameter attributes in following section. 3. Attributes 3.1Common Attributes Abbrevation cn company Name Common Name company Description Full name of the user. Company or organization name gn Given Name Home Phone mobile Home Telephone Number Mobile Telephone Number o Organization Name First name also called Christian name Home Phone number Mobile or cellular phone number Organization name or even organizational name www.escene.
PAGE 65
CC800 IPPhone ou Organizational Unit Name pager sn Pager Telephone Number surname - Telephone Number Usually department or any sub entity of larger entity Pager telephone number Surname, last name or family name Office phone number 3.2Attributes on Escene Configured Page 3.2.1 LDAP Name Filter Description: LDAP name filter is the search criteria for name look ups. The format of the search filter is compliant to the standard string representations of LDAP search filters (RFC 2254).
PAGE 66
CC800 IPPhone Returns all LDAP records which have the “telephoneNumber” or “Mobile” or “ipPhone”field starting with the entered prefix. ￠ (&(telephoneNumber=%s)(sn=*)) Returns all LDAP records which have the “sn” field set and the “telephoneNumber” field starts with the entered prefix. 3.2.3 Server Address Description: This setting refers to the DNS name or IP address of the LDAP server. Default Value: 0.0.0.0 Example: ￠ 192.168.1.100 ￠ ldap.company.com 3.2.
PAGE 67
CC800 IPPhone 3.2.7 Password Description: This setting specifies the bind “Password” for LDAP servers. Escene phones use “simple” authentication scheme for bind requests. This setting can be left blank in case the server allows anonymous binds. Otherwise you will need to provide the Password along with the Username in order to access the LDAP server. Default Value: 3.2.8 Max.
PAGE 68
CC800 IPPhone record which are to be returned in the LDAP search results by the LDAP server. This setting compresses the search results, as the server only returns the attributes which are requested. The user can configure multiple space separated number attributes by using this setting. Please consult you system administrator regarding which number attributes are to be configured. Valid Values: space separated number attributes e.g.
PAGE 69
CC800 IPPhone Default Value: Disabled 3.2.15 LDAP Lookup for PreDial/Dial Description: This setting can be used to enable call out line identification using LDAP. When the setting is turned “Enabled”, the phone performs an LDAP number search for PreDial or Dial status. Valid Values: , Default Value: Disabled 3.3 Example for Configuration You can use the below settings as a starting point and adjust the filter and display attributes according to your needs.
PAGE 70
CC800 IPPhone 5. LDAP Server Installation 5.1Install OpenLDAP Server on Windows 2003 System Install “openldap-2.2.29-db-4.3.29-openssl-0.9.8a-win32_Setup.exe” according to default prompt,please remember the install path for next steps. 1. Double click the install program to run the installation. www.escene.cn/en/ 70 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 71
CC800 IPPhone 2. Please remember the install path. E.g. C:\Program Files\OpenLDAP. www.escene.cn/en/ 71 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 72
CC800 IPPhone 3. Choose the [Full installation] mode as picture. www.escene.cn/en/ 72 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 73
CC800 IPPhone www.escene.cn/en/ 73 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 74
CC800 IPPhone 5.2Configure OpenLDAP Server 5.2.1 Configure slapd.conf file 1. Add “schema” in slapd.conf file Access to the install path (for example,C:\Program Files\OpenLDAP),open the file names slapd.conf,find the command include ./schema/core.schema Add the other commands like: include ./schema/cosine.schema include ./schema/inetorgperson.schema include ./schema/corba.schema include ./schema/dyngroup.schema include ./schema/java.schema include ./schema/misc.schema include ./schema/nis.
PAGE 75
CC800 IPPhone 3. Modify the LDAP password Access to the install path,open the file names slapd.conf,find the command rootpw secret Please modify it to the password you want to set. rootpw escene 5.2.2 Run slapd server Cmd to OpenLDAP’s install path,for example,”cd Files\OpenLDAP” , then run the command “slapd –d 1” c:\Program If run the server successfully,you can find the command of “slapd starting” NOTE: Please do not close this window to make sure the LDAP Server keep running. 5.2.
PAGE 76
CC800 IPPhone o: dn: objectClass: cn: description: Escene Organization cn=Manager,dc=escene,dc=cn organizationalRole Manager Escene Address Book Administrator Cmd to execute command “ldapadd –W –f escene.ldif”. -xv –D “cn=Manager,dc=escene,dc=cn” Input the password you set,here is escene. www.escene.cn/en/ 76 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 77
CC800 IPPhone 6. Install LDAP Client tool in Windows System 6.1 Install LDAPExploreTool2 Install the LDAPExploreTool2 according to the prompt. 6.2 Create the Configurations in LDAPExploreTool2 1. Run the LDAPExploreTool2,access to File→Configurations. 2. Create the New Configuration a. Fill in a name in Configuration option www.escene.cn/en/ 77 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 78
CC800 IPPhone b. Input the server address on Server option. www.escene.cn/en/ 78 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 79
CC800 IPPhone c. Press Test connection,the password is blank(no password),press ok,will display Test OK. NOTE: Server name or IP\Server port\Version settings are relate with the settings on escene phone. d. Configure the “cn=Manager,dc=escene,dc=cn” on User DN,and tick the Store password for protect your settings,enter the password which you configure on the server. www.escene.cn/en/ 79 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 80
CC800 IPPhone The Base DN will auto-configure if you press the [Guess value]. After the settings above,you can press [Test connection] to test your settings,if it prompt warning message,please re-try the steps above again,we can continue the next steps if the test is passed. 3. Choose the Action[LDAP],then press [Open] achieve the settings. Then you can get the page like following picture. Please right click the www.escene.cn/en/ 80 Escene Communication www.InternetVoipPhone.co.
PAGE 81
CC800 IPPhone action to add the contacts. 6.3 Add the Entry 1.Please right click the action to add the contacts. 2.Create new entry. Parent DN: This setting will automatic generation according the Configuration setting. Entry RDN: The format is cn=XXX Object Class(from schema): Select the structure class which entry belongs to, each structure class has its own must attributes and may attributes. We select [Person] for example here. Must attributes: Double click attribute to add them to the entry node.
PAGE 82
CC800 IPPhone Please notice the note label on the picture above. After save the settings, you can find the new added entry at the left of the LDAP catalogue. 3.You can add more contact entries by these steps. www.escene.cn/en/ 82 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.
PAGE 83
CC800 IPPhone ---------------------------------------------------------------------------------------------------------------------- Escene Communication Co.Ltd Address: Floor 4,Building C,Yuean Industrial Park,Huangcun Road No.51,Tianhe District,Guangzhou,China. Postal Code: 510660 Tel: (+86)20-28096798 Fax: (+86)20-28096786 http://www.escene.cn/en/ Technical Support: E-mail: support@escene.cn www.escene.cn/en/ 83 Escene Communication www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.