Instruction Manual

Page 14 Rev1.0 EN
Note that all settings that are used by the distance camera (e.g.
brightness, colours, etc.) are stored and used separately from those of
the internal camera.
7A. Distance camera controls
Top Button: Press to zoom in.
The minimum working distance at the fully zoomed-in position is 1
metre. If an object is brought closer than this the camera will not be able
to focus properly.
Middle Button: Press and release for overview mode (or other
programmed function). Press and hold for the distance camera menu
described below.
Bottom Button: Press to zoom out.
The minimum working distance when fully zoomed-out is about 1cm.
7B. Distance Camera Menu
Press and hold the middle button on the distance camera for two
seconds to display its setup menu. To navigate the menu, press the top
or bottom buttons to move up or down through the menu. Press the
middle button to select the desired function. The menu structure is
outlined below:
BUTTON FUNCTION...
OVERVIEW
FREEZE IMAGE
EXIT SUBMENU
TOGGLE MIRROR MODE
FOCUS MODE...
FULL AUTO FOCUS
PUSH TO FOCUS
EXIT SUBMENU
MENU COLOR...