Garage Door Opener User Manual

Regulatory Compliance
FCC 
FCC ID: R33C4SR150Z
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and (2) this 
device must accept any interference received, including interference that may cause 
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following 
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT! Changes or modifications not expressly approved by 
Escient could void the user’s authority to operate the equipment.
Important ! Les changements ou les modifications pas 
expressément approuvés par Escient ont pu vider l'autorité de 
l'utilisateur pour actionner l'équipement.
Wichtig! Die änderungen oder änderungen nicht ausdrücklich 
genehmigt durch Escient konnten die Berechtigung des Benutzers 
aufheben, um die Ausrüstung laufen zu lassen.
Industry Canada 
Canadian ID: 7848A-C4SR150Z
This Class B digital apparatus complies with Canada ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Australian/New Zealand Compliance
• AS/NZS 4268:2003 + A1:2005 & A2:2006.
CE Declaration of Conformity
 Product: Remote Control, Model No: RC100
The undersigned hereby declares, on behalf of Escient Corporation, that the 
above-referenced product, to which this declaration relates, is in conformity 
with the provisions of:
• Council Directive 89/336/EEC (May 3, 1989) on Electromagnetic 
Compatibility
• Council Directive 1999/5/EC (Mar 9, 1999) on Radio & Telecommu-
nication Terminal Equipment (R&TTE)
• Council Directive 73/23/EEC (Feb 19, 1973) on Low Voltage Equip-
ment Safety
• Council Directive 93/68/EEC (Jul 22, 1993) Amending Directives 89/
336/EEC and 73/23/EEC
and has been tested to the requirements of, and shown to be in compliance 
with, the following requisite standards:
• EN 55022 Class B.
• EN 55024:1998+A1+A2 Information technology equipment - Immu-
nity characteristics - Limits and methods of measurement.
• EN 300 328-2 V1.4.1 — Wide band transmission systems; data 
transmission equipment operating in the 2.4GHz ISM band. Har-
monised EN covering essential requirements under Article 3(2) of 
the R&TTE Directive.
Recycling
Limited 2 Year Warranty
Limited 2-year Warranty. Refer to www.escient.co.uk/warranty
About this Document
Copyright © 2004-2009 Escient. Escient and the Escient logo are registered 
trademarks of D&M Holdings, Inc. All other trademarks are properties of their 
respective owners. 
Part Number: RC100_0409
European Contact Information
DMI Europe
5653 MA Eindhoven
The Netherlands
Phone: +312507889
Fax: +312507840
web: www.dm-i.eu
email: info@dm-i.eu
United States Contact Information
Escient
6640 Intech Blvd. Suite 250
Indianapolis, IN 46278
Phone: 317.616.6789
Fax: 317.616.6790
web: www.escient.co.uk
email: info@dm-i.eu 


