User`s manual

PAGE 23
FireBall™ SE-80 User’s Manual
RECORDING FROM THE INTERNAL CD
The easiest way to get music into your FireBall is to record CDs using the built-in internal CD-RW
drive. This method requires no additional equipment and is very fast, as the internal CD drive can
rip audio at several times the speed of normal playback. This is known as “fast-ripping”.
Follow these steps to record using the internal CD-RW drive:
1. Press the EJECT key on the front panel.
2. Insert an audio CD (label side up) into the CD-RW tray.
3. Press the EJECT key again to close the CD-RW tray.
4. The CD’s artist, album, and track names are automatically retrieved from the
Gracenote® Music Recognition Service and are displayed on your TV.
5. Press the RECORD key on the remote control to display the Recording Options
Menu.
6. Press the RECORD key a second time to choose the default recording option
“Record to Internal Hard Drive”.
7. The Record Select Guide will be displayed showing the current CD with
checkmarks to the right of each track name.
8. Press the RECORD key a third time to begin recording the entire CD to the
internal hard drive.
• Whenrecordingiscomplete,FireBallwillreturntotheMusicGuide.
• Repeatsteps1-8foreachdiscinyourmusiccollection.
• HighlightandUnselecttracksyoudonotwishtorecordbeforepressingRECORDforthe
third time.
Note: It is also possible to set the FireBall to automatically record the CD when insert.
Refer to the section “Setting User Preferences” for setting Recording Preferences and Disc
Insert Preferences.