User`s manual
PAGE 51
FireBall™ SE-80 User’s Manual
CREATING CDS
FireBall is a complete media solution for storing, managing, and listening to your music, but what
if you want to get your music out of your FireBall and take it with you? FireBall has that covered as
well.YoucaneasilycreatecustommixCDs,backupscopiesofanyphysicalCD.
CREATING A CUSTOM MIX CD
A Custom Mix CD is a collection of songs that you record or “burn” to a blank CD. The new CD
can then be played in your car stereo, computer, or any CD player which supports CD-R or CD-RW
discs.
Follow these steps to create a custom Mix CD:
1. Press the MUSIC key to make sure you are in the Music source mode.
2. Press the RECORD key to display the Music Record Options menu.
3. Select the CREATE AN AUDIO MIX CD button if you want to create a standard
audio CD which can be played in almost any CD player or select the CREATE A
DATA MIX CD button if you want to create an data CD that can be played in any
computer or CD player which supports MP3 CDs.
4. When the Music Record Select Guide appears, you can select one or more
songs to include on your Mix CD. Navigation of the Record Select Guide is the
same as the other Guide screens. Note: You can select up to 80 minutes or 700
MB of songs because these are the maximum limits of recordable CDs.
5. Press the RECORD key again to continue the recording process and display
the Music Record Progress – CD Read screen.
6. FireBall will read each song you have selected and assemble an “image” of
all songs on it’s internal hard drive. Note: If you selected any songs which are
from changer based CDs, this process may take a while to complete as these
songs must be read in real-time.
7. After all of the songs have been read, FireBall will ask if you want to add any
more tracks to the CD. Select ADD MORE if you do want to add more tracks or
select DONE to continue creating the CD.
8. When FireBall has added all of your songs and finished creating the new CD
image, it will eject the CD tray and ask you to insert a blank CD.