Instructions / Assembly

2
1.800.352.9852 • [e-mail] •www.esco.net
3 Ton Jack Stand “High Performance Style” - MODEL #10497, 10498, 10499
CAUTION:
READ AND FOLLOW ALL WARNINGS, CAUTIONS AND INSTRUCTIONS ASSOCIATED WITH
THE PROPER USE OF THIS PRODUCT, FAILURE TO COMPLY COULD RESULT IN DEATH,
BODILY INJURY AND/OR DAMAGE TO EQUIPMENT.
Specications
Model Capacity (Per Pair)* Min. Height Max. Height Base Size
10497
3 Ton
6,000 lbs.
13.2 in
335mm
21.5 in
546mm
12 in x12 in
305mm
10498
3 Ton
6,000 lbs.
13.2 in
335mm
21.5 in
546mm
12 in x12 in
305mm
10499
3 Ton
6,
000 lbs.
11 in
280mm
17 in
432mm
9.5 in x 9.5 in
241mm
*Use stands only as identical pair. Weight-rating capacities apply to applications using matching stands.
Important Safety Information
Read these safety warnings before operation.
NOTE: The manufacturer is not responsible in any way for any damage that may
result to persons or objects due to improper use of these Jack Stands.
WARNING!
Study, understand, and follow all instructions before operating this device. Failure to heed these
warnings may result in loss of load, damage to jack stands, and / or jack stand failure resulting in
personal Injury or property damage. No alternations shall be made to this product.
WARNING!
Do not overload jack stands beyond rated capacity. Overloading can cause damage to or failure
of the jack stands and bodily harm. Position load on center of saddle only. Use stands to support
one end of vehicle. Always use stands on hard level surface capable of sustaining the load. Use
of stands on anything other than a hard level surface can result in stand instability and possible
loss of load. Use a minimum of four stands to support and stabilize a vehicle, and minimum of two
additional stands for each additional axle assembly. Do not enter the vehicle or start the engine
while the vehicle is supported on stands.