Product Manual

ManualsBrandsESCO ManualsAutomotiveEsco Pneu-Tek Pneumatic Tire Bead Breaker

1213

ESCO EQUIPMENT SUPPLY COMPANY

15270 Flight Path Drive, Brooksville, USA Florida 34604 ● Phone (800)352-9852, (352)754-1117; Fax (352)754-4508

E-mail: sales@esco.net  Web Site: www.esco.net

1



Instruction Manual

Pneu-Tek Impact Driven Bead Breaker

Model #20429

Summary of content (5 pages)

PAGE 1
213 ESCO EQUIPMENT SUPPLY COMPANY Instruction Manual Pneu-Tek Impact Driven Bead Breaker Model #20429 15270 Flight Path Drive, Brooksville, USA Florida 34604 ● Phone (800)352-9852, (352)754-1117; Fax (352)754-4508 E-mail: sales@esco.net  Web Site: www.esco.
PAGE 2
1213 ESCO EQUIPMENT SUPPLY COMPANY CAUTION: READ AND FOLLOW ALL WARNINGS, CAUTIONS AND INSTRUCTIONS ASSOCIATED WITH THE PROPER USE OF THIS PRODUCT, FAILURE TO COMPLY COULD RESULT IN DEATH, BODILY INJURY AND/OR DAMAGE TO EQUIPMENT. This product as well as all tire tools, should never be used by persons unless they have been trained properly according to the O.S.H.A. regulation #29CFR 1910.177 entitled “Servicing Single-Piece & Multipiece Rim Wheels”.
PAGE 3
1213 ESCO EQUIPMENT SUPPLY COMPANY 2. Insert the Impact tool counter-clockwise onto the grapple hook drive bolt and begin to Impact the tool into position, use the handle to guide the wedged feet between the rim edge and tire bead. 3. Impact the drive bolt until the tool is in an upright position and the wedge feet are secured between the bead and rim. 15270 Flight Path Drive, Brooksville, USA Florida 34604 ● Phone (800)352-9852, (352)754-1117; Fax (352)754-4508 E-mail: sales@esco.net  Web Site: www.
PAGE 4
1213 ESCO EQUIPMENT SUPPLY COMPANY 4. Impact the wedge foot drive bolt counter-clockwise until it strips the tire bead free of the rim. 5. Retract foot by reversing impact on wedge foot, then retract grapple hook by reversing drive bolt, finally, remove tool from rim. 15270 Flight Path Drive, Brooksville, USA Florida 34604 ● Phone (800)352-9852, (352)754-1117; Fax (352)754-4508 E-mail: sales@esco.net  Web Site: www.esco.
PAGE 5
1213 ESCO EQUIPMENT SUPPLY COMPANY Parts Breakdown & Parts List Part # Description Part # Description 1 Main Drive Bolt. 8 Bead Pusher 2 3 Thrust Washers (x2) Top Mounting Flange for Drive Assembly 9 10 3/8" set screw Grappling Hook 4 Locking Nuts (x2) 11 5 NOTE: Number 1-4 make up the Drive Assembly (this is assembled separate of the main body of the tool prior to its being attached.