! ! Car Tire Spreader Instruction Manual ! ! ! ! ! ! ! ! ! ! ! ! ! !
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
!!!!!!!!!!!!!!!! CAUTION ◆ Before using the product, insure that carefully read and fully understand the instructions manual and all stickers note on he product. This is necessary to avoid injury to the operator and amage to the product. ◆ Use this product only for spreading tire and repairing the tire protective wrap. Do not use this product for any other purpose. Our company will not be responsible for the problems caused by any wrong operation.
Product Illumination Vertical pneumatic car tire spreader special design for fixed the tires and spreading the tires during repairing cars and small trucks, microbus, in order to work for the tire polishing, cleaning and films affixed etc, equipped with work light and tools rack to improve work efficiency, enable the tire repairing work to be more convenient and faster. Manifest personalized design.
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
! Product Configuration Drawing (1) Tools Tray (2) Work Light (3) Spreading Hook (4)Orientation Pin (5) Power (6) Body (7)Descend Foot Valve (8) Ascend Foot Valve (9) Pneumatic Pump Union (10) Pneumatic Tool Union (11) Main Body Power (12) Air Regulator Device
INSTALLATION 1、Place this product on solid ground and keep its flat. fixed it on the floor is recommended. 2、Fixed work tray to the machines with bolts like picture shows. 3、Install the spreading hook on the machine withorientation pin like picture shows 4、Attach a 1/4 NPT quick coupler nipper (not provide) into the fitting located on the treadle valve assembly. Use 1/4 inch air nose with 100 p.s.i. minimum.
Operation 1、 Before start the machine, check carefully whether the fasteners on the machine are loose or not because of transportation. If yesterday, must be re-tightened. 2、 Fix the tire on the tire spreader with claw by hand. 3、 According to the size of tire which need be repaired to adjust the spreading claw to be the appropriate height. Place the spreading hook to be link pin of the hanging device.
5、 Tires need to be rotated to a new location, stamp the descend foot valve firstly to release air pressure till the spreading hook loose, then put the tire on the machine rotary to find out a suitable location. Then repeat the above operation 4 for spreading tire. 6、 The work light equipped with the machine also needs to be adjusted to the most suitable location for the full illumination, easy maintenance work.
Maintenance ◆ Add the lubrication oil to the oil cup in time, always guarantee that the oil quantity in the cup to be occupy 1/3-2/3 of the total volume. Adjust drip oil speed, piston reciprocating run every 5 ~ 6 times for drip one blob oil for standard. ensure the oil pathway lubricate fully. ◆clear away the dust and sundries always, check whether the fastener is loose or not. ◆Drip oil to the piston rod and the various parts of pin regularly. Reducing friction, extending machine life.
NO 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 CODE 110000 200000 310000 380000 380003 300003 300005 320000 330000 340000 370000 350000 300004 300002 360000 300001 300007 300006 100001 description Main Body Cylinder Bracket Power box Box cover sheath Staff 1 Waver rack Shaft Spread hook Align pin Coping Coping shaft Connect board 2 Bracket unite element Connect bo
Pneumatics Assembly
NO 501 502 503 504 511 512 513 514 515 516 517 518 519 520 521 522 523 526 527 528 529 530 531 532 533 534 535 ! CODE 210000 200003 200002 200001 DESCRIPTION Cylinder Cylinder cover Piston staff Piston Step valve Direct tie-in PU pipe red-tee PU pipe Metal speediness tie-in PU pipe Right angle tie-in Oil-water separator Metal speediness tie-in PU pipe Straight tee PUpipe PU pipe PU pipe Y- windtight ring O- windtight ring Circinal nut M56X2 Dustproof ring constringent spring Hexangular bolt M10X16 Safety
