Product Manual

miniLIFT - Mobile Lift System - MODEL #92050
3
1.800.352.9852 • [e-mail] •www.esco.net
GENERAL CHARACTERISTICS
miniLIFT is a vehicle lift is made with a folding structure and driven by two air bags. This vehicle lift has been
developed for body shops to lift the side or the front or rear wheels of vehicles, according to the needs. The lift
must only be used to lift a vehicle with the same or inferior weight as the max weight allowed. Capacity of load
indicated in this manual and on the unit 5,500 lbs. (equivilant to 2.500 KG noted on the unit). If the unit no longer
shows the “Capacity Rating” on the labeling please consult an ESCO representative for replacement labeling.
DESTINATION OF USE
This product has been developed for vehicle repair activity and has not been designed to lift people OR any other
object. The lift has to be used inside the shop, protected from atmospheric agents (rain, humidity, wind, etc.).
Failure to comply with these guidlines may result in failure of the lift and will void warranty.
In this manual you can nd the weight of the structure and maximum load. If any work is carried out on the
underside of the vehicle when using the lift additional means of support such as, the use of 2 axle stands
is compulsory to ensure the health and safety of the operative.
Any other action that is not as described in this manual will be at your own risk and considered as tampering and
it will render the warranty of this unit void.
In addition, the operator must full safety standards and risk prevention for the workplace.
NOTE: The manufacturer is not responsible in any way for any damage that may
result to persons or objects due to improper use of the miniLIFT.